Active Member
|
[China]
Address: No. 133, Mianxing East Road, High-technical Zone, Mianyang
Contact name:Li
Sichuan Otop Technology Co., Ltd. |
|
|
Passive LC / APC 2X32 19 Inch Fiber Optic Splitter for GPON EPON
♦ Details
2x32 19 inch Rack mounted PLC Splitter,SM fiber,fiber optic cable OD:0.9mm pigtail,1m length, with SC/UPC connector.
Fiber Optic PLC (planar lightwave circuit) splitter is fabricated by using silica optical waveguide technology. It features wide operating wavelength range, good channel-to-channel uniformity, high reliability and small size, and is widely used in PON networks to realize optical signal power management. We provide a whole series of 1 x N and 2 x N splitters that are tailored for specific applications. All products meet Telcordia 1209 and 1221 reliability requirements and are certified by TLC for network development requirement.
♦ Specification
| Parameter | Unit | 2x2 | 2x4 | 2x8 | 2x16 | 2x32 | 2x64 |
| Premium Grade | |||||||
| Insertion Loss at 23°C | Max. dB | 4.0 | 7.3 | 10.6 | 13.9 | 17.2 | 20.8 |
| Channel Uniformity | Max. dB | 0.8 | 1.0 | 1.2 | 1.5 | 1.8 | 2 |
| PDL | Max. dB | 0.2 | 0.3 | 0.3 | 0.3 | 0.3 | 0.5 |
| Standard Grade | |||||||
| Insertion Loss at 23°C | Max. dB | 4.2 | 7.5 | 11 | 14.5 | 17.5 | 21 |
| Channel Uniformity | Max. dB | 0.8 | 1.0 | 1.2 | 1.5 | 1.8 | 2 |
| PDL | Max. dB | 0.2 | 0.3 | 0.3 | 0.3 | 0.3 | 0.5 |
| Operating Wavelength | nm | 1260~1650 | |||||
| Return Loss | Min. dB | 60(Premium Grade) / 55( Standard Grade) | |||||
| Directivity | Min. dB | 55 | |||||
| Operating Temperature | °C | -45 to +85 | |||||
| Storage Temperature | °C | -45 to +85 | |||||
| Fiber Type | - | G657A or Customized | |||||
| Basic Type PLC Splitter | mm | 4x4x50 | 4x7x65 | 4x12x60 | |||
| 900um Fan-out Type PLC Splitter | 4x4x50 | 4x7x654x7x55 | 4x12x60 | ||||
| 900um SFF Type PLC Splitter | 4x7x60 | 4x7x65 | 4x12x65 | 6x20x80 | 6x40x100 | ||
| Cassette Type PLC Splitter | 10x80x100 | 18x80x120 | 18x115x140 | ||||
| Rack Type PLC Splitter Module | 482x240x45 (19 inch 1U) | 2U | |||||
| Flat Quick-Connect Termination Type PLC Splitter Module | 130x100x25 | 130x100x50 | 130x100x76 130x100x102 | 130x100x154 130x100x206 | |||
♦ Product Features
- Excellent Mechanical, Small Size
- High Reliability
- Low insertion Loss and low Polarization Dependent loss
- High channel counts
- Excellent Environmental Stability and Widely Used
♦ Quality Control
1. Material incoming inspection
2. Full check after every individual process finished
3. Full check after production half-done
4. Full check before packing
5. Spot examination after production
♦ Our Service
- Professional manufacturer, 100% tested.
- Customers solutions in days, not weeks.
- Warmly services with careful attentions.
- Can provide your specific inquiry within 24 hours.
- Save much costs, bring more benefit for customer to expand business.
- We have 12 years experience in this field. We are the professional supplier that you can
♦ Product Introduction
PLC splitter is based on a quartz substrate integrated waveguide optical power distribution device, has the advantages of small volume, the working wavelength range, high reliability, good light uniformity etc. characteristic, is especially suitable for passive optical network (EPON, BPON, GPON etc.) connected local and terminal equipment and realize the optical signal device.
Bare PLC splitter is putting PLC splitter chip and input, output optical fiber array in a square metal tube, out with the diameter of 0.9mm or 250um bare fiber, fiber can be welded, can also be processing various types of optical fiber connector.
Otop provides a whole series of 1xN and 2xN splitters that are tailored for specific applications. All products meet YD/T1117-2001 All optical fiber branching device technical conditions, YD-T 2000-209 PLC Integrated optical devices PLC optical power splitter, etc., and are certified by TLC for network deployment.
