Active Member
|
[China]
Address: No. 133, Mianxing East Road, High-technical Zone, Mianyang
Contact name:Li
Sichuan Otop Technology Co., Ltd. |
|
|
SC / APC Micro Type WDM In Optical Fiber PLC FBT 2.0mm 0.9mm High Isolation
1. Optical fiber data transmission.
2. CATV
3. Optical fiber communication systems.
4. Building network access.
5. FTTX applications.
6. Cabling system, ODF.
♦ Specification
| Ceter Wavelength | 1310/1490/1550nm | |||
| Bandwidth | ± 20nm | ± 40nm | ||
| Exess Loss | ≤ 0.1dB (0.05dB Typ.) | |||
| Coupling Ratio | 50/50 | 40/60 | 30/70 | 20/80 |
| Typ. Insertion Loss(dB) | 3.05 | 4.2/2.4 | 5.4/1.8 | 7.1/1.1 |
| Max. Insertion Loss(dB) | 3.4 | 4.4/2.5 | 5.6/1.8 | 7.4/1.1 |
| Polarization Sensitivity | 0.1 | 0.1 | 0.15/0.1 | 0.15/0.1 |
| Directivity | (1*2) ≥55dB, (2*2) ≥60dB | |||
| Operating Temperature | -40 ~ +80 °C | |||
| Storage Temperature | -20 ~ +70 °C | |||
| Thermal Stability | ≤ 0.1dB over -40 ~ +80 °C | |||
| Lead Length | 1m, others on request | |||
| Lead Type | Bare fiber, 0.9mm, 2.0mm, 3.0mm | |||
♦ Advanced aluminum house with good heat Dissipation
♦ Full-GaAs MMIC application with low noise. Digital signal is received -18dBm at lowest and analogy signal -9dBm at lowest.
♦ AGC control range: 0~-9dBm, output level keep unchanged.
♦ Low power consumption, high-efficiency switch power can make sure the high reliability and stability of power supply. Power consumption less than 2W. It adopts optical detecting circuit.
♦ Multi-stage anti-thunder devices (TVS transient suppression diode), strictly anti-thunder system to ensure the safe operation of the equipment
♦ Built-in WDM,single-fiber to the home (1490/1310/1550nm) triple-play application can be realized.
♦ Built-in isolator can split the two optical waves (1490nm and 1310nm)
♦ Output gain adjustable (0~18dB),output level >80dBuV.It can realize the power supply of 8V input port feeding.
♦ One output or two outputs.
