Active Member
|
[China]
Address: No. 40 Gaoxinsi road, Donghu high-tech zone, Wuhan, 20 buildings 4003, Gezhouba solar city
Contact name:Guoshou Fu
Wuhan Ouyi Optoelectronic Technology Co., Ltd. |
|
|
20KM Duplex LC 155M/s Fiber Optic SFP Module 1310nm Single Mode
PRODUCT DESCRIPTION
An optical module, also called fiber optic transceiver or optical transceiver, is a typically hot-pluggable device used in high-bandwidth data communications applications. Transceiver modules typically have an electrical interface on the side that connects to the inside of the system and an optical interface on the other side that connects to the various devices through a fiber optic cable. An optical module functions as a photoelectric converter which converts the electrical signal into light and vice versa.
The transmitter section uses a multiple quantum well laser and is a class 1 laser compliant according to International Safety Standard IEC-60825. The receiver section uses an integrated InGaAs detector preamplifier (IDP) mounted in an optical header and a limiting post-amplifier IC.
155Mb/S SFP Duplex Optical Transceiver Module Small Form Factor Pluggable (SFP) transceivers are compatible with the Small Form Factor Pluggable Multi-Sourcing Agreement (MSA). The transceiver consists of five sections: the LD driver, the limiting amplifier, the digital diagnostic monitor, the FP laser and the PIN photo-detector .The module data link up to 20KM in 9/125um single mode fiber.
This module is designed to be compliant with SFF-8472 SFP Multi-source Agreement (MSA)
PRODUCT FEATURES
Operating Case Temperature: Commerical:0 to 70 °C Industrial:-40 to 85 °C
Compliant with MSA SFP Specification
Distance up to 20KM
Single 3. 3V Power supply
Operating data rate up to 155Mbps
Tx1310, 1310nm FP Laser, PIN-TIA
Dual LC Connector Interface
Hot Pluggable,Metal enclosure, for Lower EMI
DDM function optional
Digital Diagnostic Monitor Function Compatible with SFF-8472
2 years warranty
Applications:
--100Base-LX Ethernet
--SONET OC-3/SDH STM-1
-- Fast Ethernet
-- Metro/Access Networks
Specification of Transmitter
| Parameter | Symbol | Min. | Typ. | Max. | Unit | Note |
| Average Output Power | POUT | -9 | -3 | dBm | Note (1) | |
| Extinction Ratio | ER | 8.2 | dB | |||
| Center Wavelength | λC | 1260 | 1310 | 1360 | nm | FP Laser |
| Spectrum Bandwidth(-20dB) | σ | 4 | nm | |||
| Differential Line Input Impedance | RIN | 90 | 100 | 110 | Ohm | |
| Output Eye Mask | Compliant with G.959(class 1 laser safety) | Note (2) | ||||
Note (1): Measure at 2^23-1 NRZ PRBS pattern
Note (2): Transmitter eye mask definition
Specification of Receiver
| Parameter | Symbol | Min. | Typ. | Max. | Unit | Note |
| Receiver Sensitivity | PIN | -30 | dBm | Note (1) | ||
| Los Of Signal Assert | PA | -40 | dBm | |||
| Los Of Signal De-assert | PD | -36 | dBm | Note (2) | ||
| LOS Hysteresis | PA-PD | 0.5 | 2 | 6 | dB | |
| Receiver Overload | Pmax -PIN | -3 | dBm |
Note (1): Measured with Light source 1310nm, ER=8.2dB; BER =<10^-12 @PRBS=2^23-1 NRZ
Note (2): When LOS de-asserted, the RX data+/- output is High-level (fixed)
