Home Companies Wuhan Ouyi Optoelectronic Technology Co., Ltd.

Multimode 850nm SR SFP+ Module MMF Up To 100m Dual LC Fiber Module

Active Member

Contact Us

[China]

Address: No. 40 Gaoxinsi road, Donghu high-tech zone, Wuhan, 20 buildings 4003, Gezhouba solar city

Contact name:Guoshou Fu

Wuhan Ouyi Optoelectronic Technology Co., Ltd.

Multimode 850nm SR SFP+ Module MMF Up To 100m Dual LC Fiber Module

Country/Region	china
City & Province	wuhan hubei
Categories	Other Computer Accessories

Product Details

SFP+ SR 10Gbps 850nm Multimode Fiber Module MMF Up to 100m Dual LC fiber

Applications

10 Gigcabit Ethernet

1ⅹInfiniBand QDR, DDR, SDR

High-performance computing clusters

4G and 8G Fibre Channel Applications

Servers, switches, storage and host card adapters

PRODUCT FEATURES

Support 10GBASE-SR/10G Fiber Channel application

Compliant to SFP+ Electrical MSA SFF-8431

Compliant to SFP+ Mechanical MSA SFF-8432

Multi rate of up to 11.3Gbps

Transmission distance up to 150m (OM3)

+3.3V single power supply

Low power consumption

Operating case temp

Commercial: 0°C to +70 °C

RoHS compliant

Password protection for A0h and A2h

PRODUCT DESCRIPTION

Optical module also be called optical fiber module, the translation should be transceiver module. The function of the optical module is the photoelectric conversion, and the transmitter converts the electrical signal into the optical signal. After the transmission through the optical fiber, the receiving end converts the optical signal into the electrical signal. SFP+ is a kind of optical module.

SFP+10G-SR MultiMode Transceiver is SFP+ modules for duplex data communication as 8G Fiber Channel, IEEE 802.3ae 10G Base-LR/LW It is SFP+ 20-PIN Connector to allow hot plug capability.

Digital diagnostic monitor functions are available via I²C. This module is designed and operates at 850nm wavelength.

Absolute Maximum Ratings

Table2- Absolute Maximum Ratings

Parameter	Symbol	Min.	Typical	Max.	Unit	Notes
Supply Voltage	Vcc₃	-0.5	-	+3.6	V
Storage Temperature	T_s	-40	-	+85	°C
Operating Humidity	RH	+5	-	+85	%	1

Note1: No condensation

Recommended Operating Conditions

Table 3- Recommended operating Conditions

Parameter	Symbol	Min.	Typical	Max.		Unit	Notes
Operating Case Temperature	T_C	0	-	+70	°C
Power Supply Voltage	Vcc	3.14	3.3	3.47		V
Power Supply Current	Icc	-	-	150		mA
Power Dissipation	Pd	-	-	0.6		W
Bit Rate	BR	-	10.3125	-		Gbps

Electrical Characteristics

Table 4- Electrical Characteristics

Parameter			Symbol		Min.	Typ.	Max.	Units		Notes
Transmitter
Differential Data Input Swing			V_in,P-P		200	-	1600		mV_PP
Input Differential Impedance			Z_IN		90	100	110		Ω
Tx_Fault	Normal Operation		V_OL		0	-	0.8		V
	Transmitter Fault		V_OH		2.0	-	V_CC		V
Tx_Disable	Normal Operation		V_IL		0	-	0.8		V
	Laser Disable		V_IH		2.0	-	V_CC+0.3		V
Receiver
Differential Date Output				V_out	370	-	1600	mV
Output Differential Impedance				Z_D	90	100	110	Ω
Output Rise Time(20-80%)				T_R	24	-	-	ps
Output Fall Time (20-80%)				T_F	24	-	-	ps
Rx_LOS		Normal Operation		V_OL	0	-	0.8	V
		Lose Signal		V_oH	2.0	-	V_CC	V

Optical Characteristics

Table 5-Optical Characteristics

Parameter	Symbol	Unit	Min	Typ	Max	Notes
Optical transmitter Characteristics
Bit Rate	BR	Gbps	9.953	10.3125	11.3
Center Wavelength Range	λc	nm	820	850	880
RMS spectral width	△λ	nm			0.45
Average Launch power Tx_off	Poff	dBm	-	-	-45
Launch Optical Power	P₀	dBm	-6.5		-1	1
Extinction Ratio	ER	dB	3	-	-
Jitter P-P	JP	ps	-	-	27
Jitter RMS	JR	ps	-	-	5
Optical Rise/Fall time	Tr/tf	ps	-	-	100
Optical Receiver Characteristics
Bit Rate	BR	Gbps	9.953	10.3125	11.3
Receiver Sensitivity	RS	dBm	-	-	-9.9	2
Overload Input Optical Power	P_IN	dBm	-1	-	-	2
Center Wavelength Range	λc	nm	820	-	880
LOS	LOS_D	dBm	-	-	-12
LOS	LOS_A	dBm	-26	-	-
LOS Hysteresis		dB	0.5	-	-