Home Companies Shenzhen Dexihong Technology Co., Ltd.

Non Irritating KN95 Respirator Mask Breathable High Filtration Efficiency

Active Member

Contact Us

[China]

Contact name:Daisy Xiong

Shenzhen Dexihong Technology Co., Ltd.

Non Irritating KN95 Respirator Mask Breathable High Filtration Efficiency

Country/Region	china

Product Details

Breathable KN95 Respirator Mask For Healthcare Non Irritating To Skin

Product Description

1. The user obviously feels that the breathing resistance is greater than before and must be replaced
2. Masks are damaged and must be replaced
3. It is recommended to replace it after using it 4 times.
4. However, masks cannot be reused if people go to the hospital, come into contact with an infected person, or are suspected to be infected.

Feature

Anti coronavirus, anti dust and virus.
Disposable Great elasticity face mask.
Non woven face mask is made of spunbonded non woven fabric and melt blown non woven fabric
Low respiratory resistance, no odor, no irritation.
Use ultrasonic welding technology, comfortable wearing, breathable, hygienic, and biodegradable.

Specifications

Color	White
Product name	KN95 Face Mask
Dimensions	1601105mm±5mm
Inner layer	PP needle-punched nonwoven
Filter media	PP meltblown high filtration layer
Outer layer	PP spunbond
Adjustable nose clip	Aluminum-90*5mm
Soft foam nosepiece	PU doam-90*5mm
Elastic head band	Latex-free elastic-width 7mm

Advantages

Ar, dust, filtration sterilization,particulate ultrasonic sealed edge, comfortable to wear.Can prevent dust and microorganism good, long time do not wear tight, no allergic reaction, using a smooth cloth to reduce fibre shedding, disposable, maintenance free,convenient and practical, safe and hygienic.

Usage

Non-woven mask for disposable goods, convenient use, and make relevant purification treatment, can be used for food. The medical, pharmaceutical, electronics.Textiles. Clean room operators, but also to do dailyactivities using other industry. The mask has been sterilized in the production process.

Directions for use

The mask is for single use only.
The mask should not be removed from its packaging until its required for use.
Use the respirator in accordance with applicable health and safety regulations.
Fit the respirator and check leak-tightness before entering the contaminated area.
Wear the respirator for the whole duration of exposure to contaminants.It should not be used for more than 8 hours continuously and should be discarded after use.
Transport and stockage of unused masks should be such that the product is not stored in direct sunlight and in frost free conditions,not in contact with solvents and cannot be damaged by physical contact with hard surfaces/items.
As required by European Health and Safety requirements,the user is advised that when the mask is in contact with the wearer’s skin,it may cause allergic reaction to susceptible individuals.If this is the case,leave the hazard area,remove the mask and seek doctor’s advice.