Active Member
|
[China]
Address: No.377 Changbang Road, Wujiang Economic and Technological Development Zone
Contact name:Chuanchuan Li
jiangsu jzer Automation Technology Co.,Ltd. |
|
|
3.5KW Sheet Mask Making Machine , Protective Face Mask Production Machine
Technical Parameters
Import raw materials, automatic feeding, nose line cutting /
feeding, hemming welding, folding scene, forming welding,
photoelectric detection, automatic slicing, finished product
output, receiving tray sorting, full automation
No. | Name | Parameter |
| 1 | size | 6500 (length) * 3500 (width) * 1950 (height) |
| 2 | Weight | Total equipment weight ≤5000KG Ground load 3500KG / ㎡ |
| 3 | Color | Color Sheet metal warm gray 1C, primary color of aluminum profile |
| 4 | Working power supply | 220VAC ± 5% 50HZ grounding protection Rated power ≤10KW (including welding machine) |
| 5 | Compressed air | 0.4-0.6MP (clean water after dewatering, no oil, filtration, pressure stabilization), use flow rate is about 300L / min |
| 6 | Production efficiency | ≥100PCS/min |
| 7 | The product qualification rate | 99% (except for the original material and human operation) |
| 8 | Main accessories | Cylinder: AirTAC Screw guide rail: HIWIN / TBI PLC: Mitsubishi or Xinjie |
| 9 | Operating environment | General workshop environment is acceptable (no corrosive odor, no dust) |
Item | Material | Specification | Coil outer diameter | Coil inner diameter |
| 1 | Outer non-woven fabric | 200mm wide roll material | Recommended less than 600mm | greater than 65mm |
| 2 | Inner layer non-woven fabric | 190mm wide roll material | Recommended less than 600mm | greater than 65mm |
| 3 | Melt tape | 175mm wide roll material | Recommended less than 600mm | greater than 65mm |
| 4 | Nose bridge strip | 3.0mm wide roll material | Recommended less than 400mm | greater than 65mm |
| 5 | ear straps | 2.8mm round coil |
Feature
1. Aluminium alloy structure is adopted, which is beautiful and
firm without rust.
2. Computer PLC programming control, high stability, low failure
rate and low noise.
3. Servo motor imported from Taiwan, stepper motor drive, high
precision.
4. Photoelectric detection of raw materials to avoid mistakes and
reduce waste.
5. This equipment can supply 2 inner ear strap machines or outer
ear strap machines.
6. The machine adopts pulleys and fixed feet, which is convenient
and fast to move, strong in fixation and unshakable.
7. This model is equipped with a new advanced conveyor belt, which
automatically collects products with high accuracy, and only needs
to be sorted and packed.
technical parameter
1. The length, width and height of the machine: the size of the
whole machine is subject to the actual 6500MM * 3500MM * 1600MM
2. Voltage: AC220V 50-60HZ
3. One-to-two production efficiency: more than 100 pieces / min
4. Power: 3.5KW
