jiangsu jzer Automation Technology Co.,Ltd. |
Personal Protective 3 Layer Face Mask Maker Machine , Mask Production Line
The mask machine can only produce disposable flat masks with size
175*95mm. Whether the masks produced by this machine are medically
independent of the machine, as long as the masks are sterilized,
the masks produced by this machine can be used to For surgical
masks.
Common medical masks: mainly composed of three layers of non-woven
fabric. The inner layer is a common non-woven fabric; the outer
layer is a non-woven fabric with a waterproof treatment, which is
mainly used to isolate the liquid sprayed by the patient; the
middle filter layer is an polypropylene meltblown non-woven fabric
treated with electret.
Features
Technical parameter
1. The length, width and height of the machine: the size of the whole machine is subject to the actual 6500MM * 3500MM * 1600MM
2. Voltage: AC220V 50-60HZ
3. One-to-two production efficiency: more than 100 pieces / min
4. Power: 3.5KW
Technical parameters:
Import raw materials, automatic feeding, nose line cutting / feeding, hemming welding, folding scene, forming welding, photoelectric detection, automatic slicing, finished product output, receiving tray sorting, full automation
No. | Name | Parameter |
1 | size | 6500 (length) * 3500 (width) * 1950 (height) |
2 | Weight | Total equipment weight ≤5000KG Ground load 3500KG / ㎡ |
3 | Color | Color Sheet metal warm gray 1C, primary color of aluminum profile |
4 | Working power supply | 220VAC ± 5% 50HZ grounding protection Rated power ≤10KW (including welding machine) |
5 | Compressed air | 0.4-0.6MP (clean water after dewatering, no oil, filtration, pressure stabilization), use flow rate is about 300L / min |
6 | Production efficiency | ≥100PCS/min |
7 | The product qualification rate | 99% (except for the original material and human operation) |
8 | Main accessories | Cylinder: AirTAC Screw guide rail: HIWIN / TBI PLC: Mitsubishi or Xinjie |
9 | Operating environment | General workshop environment is acceptable (no corrosive odor, no dust) |
Item | Material | Specification | Coil outer diameter | Coil inner diameter |
1 |
Outer non-woven fabric |
200mm wide roll material |
Recommended less than 600mm |
greater than 65mm |
2 |
Inner layer non-woven fabric |
190mm wide roll material |
Recommended less than 600mm |
greater than 65mm |
3 |
Melt tape |
175mm wide roll material |
Recommended less than 600mm |
greater than 65mm |
4 | Nose bridge strip | 3.0mm wide roll material |
Recommended less than 400mm |
greater than 65mm |
5 | ear straps | 2.8mm round coil |