High Speed Paper Cup Making Machine 75-85pcs/Min Heater Knurling Bottom

cup machine making coffee paper middle speed paper cup machine paper cup brand print machine

Machine model: high-speed simple paper cup machine
Backside Soldering : Copper Heater Ultrasonic Heater

Raw material : single side PE coated paper (popular hot drink cup) single/double PE coated paper (popular hot drink cup and cold drink cup)
Total weight : Gw /NW:1750 kgs/1650 KgS.
Working air source (ultrasonic): Air pressure 0.4MPa a. machine.
Cup bottom heating: heater knurling (single-sided PE paper is heated and knurled; double-sided PE paper is knurled with cooling device circular water.)
Bottom knurling: heat knurling (if using single layer PE coated paper)

Electric System:

High-quality brand electrical systems, such as Delta, Schneider.
The PLC control system adopts the Delta brand, which is made in Taiwan and is reliable.
quality.

Servo Motor:

The bttom paper feeding is controlled by servo motor and stepping motor,which greatly improve paper feeding in high precision and
high efiency way.(more stable ,less troubles and save bottom paper)

Excerpted from the Internet, for reference only
Often come into contact with various styles of paper cups
There are many creative paper cups with more patterns printed on them
In the design process of paper cups, there are two points to pay attention to:
1. Try not to design and use full-color paper cups. The full-color paper cups are piled up too much ink, and the paper cups are directly sealed when they are consumed. Inorganic compounds emitted by solvent inks during the drying process, chemical substances in alcohol wet liquid, and volatile gases from glazing coatings are all harmless to human health. In a sealed space, the background color of the full-page paper cup covers the entire cup body. When we use the paper cup to drink water, our lips will touch the cup mouth to a certain position, and it is easy to bring the above-mentioned various chemicals into the liquid together with the liquid. Affects the health of the body. Also, it is not suitable to design graphics near the mouth of the cup, especially block color ink. Otherwise, strange and bad effects will occur.
2. For the bar near the bottom of the cup, the text design should be raised by 5mm. After the cup is put on the machine, the pressing should be stopped at 5mm at the bottom of the cup to ensure the firmness of the bottom of the cup. However, the low temperature and pressure of the machine can easily make the graphics and text near the bottom of the cup smudged, affecting the appearance.