|
[China]
Trade Verify
Address: Xianke Building Bagua 4th Rd Shenzhen China
Contact name:Xiang
Shenzhen HYPET Co., Ltd. |
|
Verified Suppliers
|
|
|
Twin Screw-Extruder / Pellet Extruder Machine Conical Double Screw Extruder Machine 80/156 55kw 540kg/H
Twin Screw-Extruder HYPET advantages of conical twin screw extruder
Twin Screw-Extruder Main specification
| SN | Parts name | Specification | Pellet Extruder Machine Description |
| 1 | Extruder | Extruder model | HYZS-80/156 conic twin screw |
| Output | 750kg/h | ||
| Center height | 1100mm | ||
| Weight | 4100kg | ||
| 2 | Screw | Diameter | Ø80/156 mm |
| Material | 38CrMoAlA + special alloy | ||
| Finish | Nitrogen-filled (0.50~0.70mm depth) and polish | ||
| Rotate speed | 0~38 r/min | ||
| Core of the screw | Auto control for temperature | ||
| 3 | Barrel | Material | 38CrMoAlA with bi-metal type |
| Inside finish | Nitrogen-filled (0.50~0.70mm depth) and rubbing | ||
| Heating control area | 4 zones | ||
| Heating way | Cast aluminum/ ceramics | ||
| Heating power | 30 kW | ||
| Cooling system | Low-noisy barrel cooling fan | ||
| Cooling power | 0.3kwx2 sets, 0.5kwx1 set | ||
| 4 | Gear box | Housing material | Ductile iron QT-500 |
| Gear material | 20CrMnTi | ||
| Gear surface | Hardened and ground in high precision | ||
| Axis material | 40Cr | ||
| 5 | Twin screw Dosing feeder | Supplying material motor | 1.1 kW |
| Speed range | 1-50 RPM | ||
| Inverter | ABB heavy loader type | ||
| 6 | Vacuum degas with selector | Vacuum degree | -0.004Mpa |
| Motor power | 2.2 kW | ||
| 7 | Driving motor | AC motor power | 55 kW |
| AC inverter controller | ABB |
Twin Screw-Extruder Photo
Twin Screw-Extruder Terms & conditions
1. Twin Screw-Extruder Training and services
1) Instruction of field installation
2) Equipment field debugging and trial run if required by the buyer according to the rule.
3) Training on field operation and maintenance for customer's personnel.
4) Provide technical consultation service on long-term basis.
2. Twin Screw-Extruder Terms of payment
1) T/T and L/C (irrevocable, at sight) both are acceptable.
2) 35% of the total contract value should be paid in advance, balance 65% of the total value is to be paid before shipping at the Seller’s factory.
3. Twin Screw-Extruder Time of delivery
1) When the contract becomes valid, the machine should be delivered within 50 days since receipt of the advance payment. And the equipment will be in normal operation after debugging within two weeks after arrival.
2) During production, provided that the Buyer requests to modify the specification of the order, the Buyer shall notify the Seller of this modification in written form. Upon receipt of the notice, the Seller will quote to the Buyer the cost of this modification and notify the Buyer of any possible delay due to this modification.
