ZUOAN ELECTRIC APPLIANCE CO., LTD. |
|
How to use CraneSTAR-500
First, you need to decide what angle you want to display on the
monitor. As long as you want, you can deploy the CraneSTAR-500
camera anywhere on the construction site.
For example, on the hook of the crane, in any corner of the
construction site or in the cab, on the boom of the crane, or
behind the cab, that is, anywhere the driver wants to see
Since our camera, battery and repeater are all equipped with
matching high-strength magnets, you can easily place the camera
battery and repeater on any iron place. Then you need to do 3
things,
First: Plug one end of the wire into the camera and the other end
of the wire into the battery.
Second: Connect the 12V DC power supply to the repeater
Third: Turn on the monitor and open the video APP
In this way, you can immediately see the picture you want on the
monitor
What is the wireless transmission performance of CraneSTAR-500?
CraneSTAR-500 can transmit high-definition 1080P digital images
within 500 meters without any pressure. The signal of CraneSTAR-500
cannot pass through a huge entire building, while it can easily
pass through one to two floors of concrete walls, or three floors.
To the fifth floor wooden walls and some small obstacles.
Is the signal of CraneSTAR-500 stable?
It is very stable and can usually work continuously for 5-10 hours
without the obstruction of huge buildings without any screen
freezes or freezes.
In addition to being used on cranes, where can CraneSTAR-500 be
used?
CraneSTAR-500 has a wide range of applications, such as oil fields,
offshore drilling platforms, giant oil tankers, terminal container
cranes, etc.
How much does CraneSTAR cost?
The price of CraneSTAR's complete set is only 20% of similar
international products.
The price of CraneSTAR is unbelievable, but is its quality
authentic?
You don’t need to worry about the quality of CraneSTAR,
We provide a 3-5 year quality guarantee. If our equipment is
damaged due to improper use or harsh environment during use, we can
provide free replacement service.
This is a wireless sending camera, 2 megapixels 20X zoom, the
interface is 5.8G--wifi antenna and 12V-DC power supply,
This is a wireless repeater. It can transmit video with the camera
across 500 meters. At the same time, connect it to the mobile phone
through WIFI and you can control the camera on the mobile phone. It
has 3 antennas and a 5-12V-DC power plug. Very easy to connect
Both the camera and repeater are IP68 waterproof.
In the past, during the operation of the crane, before the use of
products similar to CraneSTAR, the crane driver needed to follow
the orders of the remote commander.
Due to obstacles or long distances, the driver cannot clearly see
the status of the work area and can only rely on the commander's
orders to operate the crane. However, relying solely on the
information heard is very easy to make mistakes, resulting in
production accidents.
After installing CraneSTAR, you can see the scene at close range
from another angle, which greatly improves safety.