|
[China]
Trade Verify
Address: 65 EAST XINHUAN ROAD, SHANGHAI, CHINA
Contact name:Bill, George, Michael
ROSCHEN GROUP |
|
Verified Suppliers
|
|
|
Matrix 9 Grade HQ HQ3 HWL Impregnated Diamond Core Bits Longer
Lifespan For Cut Quartz
ROSCHEN's 7 grade bits cuts through quartz and all types of granite
or equivalent hardness rocks without any problem, and is well
adapted to softer and abrasive ground.
Exploration Drilling Products:
The impregnated diamond bits are the most commonly useful bits in
the mineral exploration industry, as they have the widest range of
application. The carefully selected grades of high quality
synthetic diamond are distributed in the depth of impregnated bit's
matrix series. The matrix layer of the crown contains a uniform
distribution of these crystals that are embedded in a powdered
metal bond. The matrix of our impregnated bits is designed to
expose new diamonds to the bits' cutting face as wear occurs. Fast
penetration rate is maintained as a result of this action. Our
impregnated bits are manufactured to give optimum penetration rates
and bit life, which is required to keep the cost of diamond
drilling to a minimum. The optimum diamond size, concentration and
matrix type are dependent on the hardness and abrasiveness of the
formation to be drilled. When order, please read.
Brief Introductions of Impregnated Diamond Bits:
The impregnated diamond bits are cutting tools. They contain
diamond segments bonded to a base material. They are widely applied
in cutting non-ferrous materials. The selected grades of synthetic
diamond of high quality are distributed in the depth of impregnated
bit's matrix series. The matrix layer of the crown contains a
uniform distribution of these crystals that are embedded in a
powdered metal bond. This diamond tool is widely applied in the
mineral exploration industry.
Features of Impregnated Diamond Bits:
1. This diamond tool features with fast penetration rate, because
the matrix of our impregnated diamond bits is specially designed
(it is designed to expose new diamonds to the bits' cutting face as
wear occurs).
2. Can help reduce the cost for diamond drilling: our impregnated
diamond bits are manufactured to give optimum penetration rates and
service life.
3. The hardness and abrasiveness of the formation to be drilled
largely determined the optimum diamond size, concentration and
matrix type, etc.
Available Size for our Impregnated Diamond
Bits:
Size Available:
| Q Wireline series: | AQ, BQ, NQ, HQ, PQ/AQTK, BQTK, BQ3, NQ2, NQ3, NQTT, HQ3, HQTT, PQ3, PQTT |
| T2 series: | T2 46, T2 56, T2 66, T2 76, T2 86, T2 101, T2 116, T2 131 |
| T6 series: | T6 76, T6 86, T6 101, T6 116, T6 131, T6 146, T6S 101, T6S 116 |
| T series: | T36, T46, T56, T66, T76, T86, T101, T116, T131 |
| Z series: | Z46, Z56, Z66, Z76, Z86, Z101, Z116, Z131, Z146 |
| B series: | B36, B46, B56, B66, B76, B86, B101, B116, B131, B146 |
| WF series: | HWF, PWF, SWF, UWF, ZWF |
| WT series: | RWT, EWT, AWT, BWT, NWT, HWT, PWT |
| WM series: | EWM, AWM, BWM, NWM, HWM |
| WG series: | EWG, AWG, BWG, NWG, HWG |
| QWL series: | AQWL, BQWL, NQWL, HQWL, PQWL, NQWL2, NQWL3, NQTT, HQWL3, HQTT, PQWL3, PQTT |
| Others: | NMLC, HMLC, LTK48, LTK60, BGM, NGM, ADBG, TBW, TNW, ATW, BTW, NTW, NXD3, EX, AX, BX, NX, NXC, EXT, AXT, EXU, AXU, NXU, T6H, 4-9/16, NWD4, 412F, SK6L146, K2-101, K2-116, TT46, TB56, TS116, CHD101 |
Please feel free to send us your inquiries & requirements by roschen@roschen.com ; roschen@roschen.net .
