Active Member
|
[China]
Address: No.66 Yuejin Road, Changan District, Shijiazhuang City, Hebei Province
Contact name:Carol Feng
Hebei Ares Metal Products Co.,ltd |
|
|
Custom Opening Powder Coating Expanded Metal Mesh Ceiling For Building
General Production Information
Production introduction
Ares's Expanded metal ceiling have various size,pattern,and color.It is made by cutted and stretched to form a metal mesh-like material. The strands and knuckles are set at an uniform angle to the plane of the sheet. This adds strength and rigidity and distributes the load to the supporting frames.
As there are big open area, it reducesed the weight of the ceiling,another side, as metal ceiling, it has the same advantages inside a building as on the outside from fire resistance to variety in finished, it is easy to clean,it helps dafray utility costs through more efficient heating and cooling.Expanded metal mesh are also available to help absorb or redirect sound.
Expanded metal mesh ceiling can be coated with any color you like and can be made by different materails, brass, aluminum, and chrome. It can be disigned to different shapes to provide a different aesthetic.
Specification:
| Thickness | 1.0-3.0 mm |
| LWD | ≤50mm |
| SWD | ≤25 mm |
| Size | 600 mm × 1200 mm |
| 700 mm × 1400 mm |
Surface Treatment:
Powder coating is a dry finishing process in which free-flowing, thermoplastic or thermoset powder material, rather than a liquid suspension, is applied to a surface, melted, and then allowed to dry and harden into a protective coating. Typically, the powder is applied via electrostatic spray deposition (ESD) to an electrically grounded metal substrate. Once the powder coating is completely applied to a part, it is then heat cured in an oven until the powder melts and flows together. Powder coatings can also be applied by dipping preheated parts into powder material within a fluidized bed. The powder melts and fuses with the part’s heated surface upon contact. In either case, as the part dries and cools, the cured powder forms a smooth, hard finish.
Custom sevice
Expanded Metal Mesh Ceiling Accessory:
Expanded Metal U-Edging is an expanded metal product accessory. it is a metal U-shaped L-shaped or square pipe strip attached to the edge of an expanded metal product to make the edges more attractive and uniform. It provides a safety barrier at the cut edge of the sheet covering sharp cut edges, it is available in carbon steel,stainless steel, aluminum and galvanized sheet.
Product Features:
Our advantages:
