ODM HBY Excavators Rod Buffer Seal Hydraulic Rod Seals Customerized

HBY Buffer Hydraulic Seal

Buffer rings buffer the pressure spikes of hydraulic systems. They act as a primary rod seal, and at the same time enable trapped fluid sealed by the secondary seal, which is down stream of the buffer, to be pumped back into the system. When a buffer ring is used in combination with a lip seal, the resulting sealing system provides long life with an exceptionally dry rod. Buffer seals are commonly used for rod seal application only.

Technical Data:
Pressure: 50MPa
Temperature: -55-+120°C
Sliding Speed: 1m/s

Application:
Excavators
Mobile hydraulics
Standard cylinders
Press

Medium:
Mineral oil based hydraulic fluids,barely flammable hydraulic fluids,water,air and others.

Precautions

1. Clean the installation location;

2. Remove the burrs during the installation movement of the seal;

3. Apply lubricant on the seals;

4. Protect the sealing surface from damage;

5. Recheck to confirm that the size of the seal is correct;

6. Use corresponding tools to install the seals that need to be deformed and installed.

 GET FREE SAMPLES!    PUT YOUR INFORMATION BELOW AND THE SAMPLE YOU NEED WIHT YOUR ADDRESS