|
[China]
Trade Verify
Address: Room 101, 1st Floor, No. 6, Third Street, Pingshan Industrial Zone, Shibi Street, Panyu District, Guangzhou, China
Contact name:Zoe Zou
Sinuo Testing Equipment Co. , Limited |
|
Verified Suppliers
|
|
|
IEC62196-3 Electric Vehicle Charging Interface Misalignment Test Apparatus
Complied Standards & Clauses For Charging Interface Misalignment Test Apparatus
This misalignment test apparatus conforms to IEC62196-3 clause 36.3, figure 18.
Equipment Overview For Charging Interface Misalignment Test Apparatus
Samples and Limits: Charging Interface.
Test purpose: It is used to apply forces in the up, down, left, and
right directions to the grip point of the charging gun, to simulate
the offset operation it is subjected to during normal use, and to
verify its compressive strength in all directions.
Test principle: Use the servo motor to drive the manipulator to
realize the sequential application of force in the four directions
of -X+X-Y+Y, and the force value and interval time are in
accordance with the standard requirements.
Equipment dimensions: 1100×700×1400 (mm) W×D×H, equipment weight:
260kg.
Power supply: AC220V±10%/50-60Hz, working temperature 5-35℃,
humidity 30%-90%.
Technical Parameters For Charging Interface Misalignment Test Apparatus
| Power | Customized according to requirements |
| Control Method | PLC control, touch screen operation |
| Station | Single station |
| Force | 100N (Force value sensor monitoring, system automatic control) |
| Force holding time | 0-999.9s |
| Interval time | 0-999.9s |
| Force application direction | -X, +X, -Y, +Y |
| Specimen mounting bracket | 1000mm height from the ground |
| Overall dimensions of equipment | 1100mm×400mm×1500mm,260kg |
This apparatus is conforms to these Standard Figures:
Force applying mechanism
