Home Companies MINKO (SZ) TECHNOLOGY CO., LIMITED

Type2 EV Charging Station 8-32A Adjustable 1 Phase Wallbox AC EV Charger 7.4m Cable

MINKO (SZ) TECHNOLOGY CO., LIMITED

Contact Us

[China] country

Trade Verify

Address: 309 West Lake Industrial Zone, Cuishan Road, Dongxiao Street, Luohu District, SZ

Contact name:Yumiko

Inquir Now

MINKO (SZ) TECHNOLOGY CO., LIMITED

Verified Suppliers
  • Trust
    Seal
  • Verified
    Supplier
  • Credit
    Check
  • Capability
    Assessment

Type2 EV Charging Station 8-32A Adjustable 1 Phase Wallbox AC EV Charger 7.4m Cable

Country/Region china
InquireNow

Product Details

Type2 EV Charging Station 8-32A Adjustable 1 Phase Wallbox AC EV Charger 7.4m Cable
 
Description of Type2 Wallbox EV Charger
This product is mainly composed of charging station host, charging gun, wire, installation
backplane, installation ingredients package, etc. It is a household electric vehicle charging
equipment. The AC charging station is connected to the mains, the electric vehicle will be
safely and reliably charged by the charging gun interface; to avoid affffecting the product
performance, should no acid and alkali and other corrosive gases in the surrounding; try to
avoid direct rain or use in environments with high humidity, and should try to prevent damage
from impacting the housing.


Product parameter description:

ModelI7I11I22
Input / Output VoltageAC 230V / Single PhaseAC 400V / Three PhaseAC 400V / Three Phase
Input / Output Current8,12,16,20,24,28,32
adjustable
8,10,12,14,16A
adjustable
8,12,16,20,24,28,32A
adjustable
Max Output Power7.36 KW11.04 KW22.08 KW
Frequency50/60Hz
Input Cable1M, hard-wired
Charging PlugType 2(Mennekes)

Length

 European standard, Default 5M

Withstand Voltage3000V
Work Altitude<2000M
Stand by<3W

 Operating temperature

-35°C to 50°C

 Start method

Card, WIFI, Bluetooth APP a variety of options to start charging


Protection
 
over voltage protection, over load protection, over-temp
protection, under voltage protection, earth leakage protection,
lightning protection, short circuit protection
IP levelIP65
Touch ButtonYes
LCD ScreenYes
Current AdjustmentYes
Bluetooth APP chargingYes / No
WiFi APP chargingYes / No
RFIDYes
Timing / AppointmentYes / No
CertificationCE, RoHS

 Warranty

1 Year for the whole machine

 
Feature of Wallbox Charger Station
 
1. The product complies with the Low Voltage Directive 2014/35/EU, IEC61851-1:2019
2.IP65, weatherproof; leakage protection; impact resistance
3. Charging status and working error are simply displayed by LED indicator light and LCD screen
4. Optional unction of current selection button,
5. 8A-48A free switching current
Card, WIFI, Bluetooth a variety of options to start charging


Function introduction of Type2 Wallbox EV Charger
1.Residual current detection (RCD)

Ac leakage protection automatically detects the AC mismatch between the power supply wires,
which indicates that the current flflows through the grounded (PE) wire. Ac residual current fault
protection will trip when the current is 30 Ma.

2.Surge protector
In: 3kA, lmax:6kA
3.Leakage protection
When the leakage protection is started, it needs to be cut offff the power outage and restart.
4.Overcurrent protection
When the current exceeds the early warning value,the charging pile cuts offff the power output, restarts
automatically after 10 seconds, and does not recover automatically after 3 cycles until you cut of the
power and restart.
5.Overvoltage protection
The protection starts when the voltage exceeds 275V, and automatically recovers when the voltage
is restored and stabilized.
6.Undervoltage protection
Start the protection when the voltage is less than 100V, and restore automatically when the voltage
is restored and stabilized.
7.Overtemperature protection
Start the protection when the internal temperature of the EV charging station exceeds 85 °C.
 
Installation Procedure:
1. Please use a percussion drill to drill holes according to the cardboard positioning
2. Install expansion bolts(6*M6*60MM)
3. fix the Mounting backplane with self=tapping screws(6*M5*50mm)
4. Align the main unit with the buckle on the back panel and install it, and then use screw
to fix(4*M5*40)
 

Instructions

1. When the machine is on standby normally, the indicator light is fixed blue.
2. Remove the charging gun from the holder, insert the charging gun into the car charging
socket.
3. After the gun insertion completed, the vehicle automatically starts to charge normally, and
the blue meteor light on.
4. The indicator light always turns blue after the charge is completed.

 

 


 

Hot Products

150A 1000V DC EVSE CCS2 To CCS1 Car Charging Adapter EV Charging Connector Adapter A charging ...
5M European Standard AC EV Charger 32A Electric Vehicle Fast Charging Pile Home Using Detailed ...
8-32A Adjustment Current Type 2 AC EV Charger ,Fast Home Outdoor EV Charging Pile Detailed ...
16A Timing Appointment Support Type2 AC 400V EV Charger,Smart Wallbox Charging Station Description ...
Type2 EV Charging Station 8-32A Adjustable 1 Phase Wallbox AC EV Charger 7.4m Cable Description of ...
250V AC EV Charging Charger Adapter for Tesla Model 3/Y/S/X SAE J1772 60Amp What to Know About a ...