Wall Mounted 32A EV Wallbox AC Charger RFID Card High Compatibility

AC 22kw Ev Charging 32A EV Wall-mounted 400V AC RFID Card/APP

APP Functions

Charging by appointment
Charge late at night by appointment, low-carbon, eco-friendly, lower electricity bills

Real-time data
Real-time display of current charging voltage, current and power
Accurate metering of the charge pile's electricity consumption, so that every dollar of electricity used is clearly visible.

Charging station historical usage report
Daily and monthly charging status at a glance

Smart WIFI networking
OTA upgrades; improved troubleshooting through remote diagnostics

Power adjustment
Customised charging power, adjustable up to 1.8KW-22KW.

How to charge for 3 options?

A. Automatic start charging

1. Turn on the power switch, the display shows the standby state, then starting completed;

2. As shown, plug in the charging plug, the charging station indicator shows green, when the charging lamp flashes, it means that the charging has started;

3.after charging is completed, pull out the cable and insert the cable into the socket or on the cable hook.

B. Button start charging

1. Turn on the power switch, the display shows standby, start complete;

2. As shown, plug in the charging plug, the charging station indicator shows green, press the right button of the charging station, when the button lights up as shown, the charging lamp flashes and flashes, indicating that charging has started;

3. After charging is completed, please press the button, pull out the charging cable, insert the cable into the socket or store it on the cable hook.

C. Swiping start charging (RFID)

1. Turn on the power switch, the display shows the standby state, start the completion;

2. As shown, plug in the charging plug, the charging station indicator shows green, use the charging card to start charging, when the charging lamp flashes, it means that charging has started.

3. Please re-swipe the card again and the charging is completed, then put the cable back into the socket or on the cable hook

Packing & Delivery

Specification

Why us

1. Function test:
A.charging function control test,
B.communication function test,
C.insulation detection function test,
D.vehicle plug locking function test,
E.pre-charging function test
2. Charging output test:
A.four ui large constant power output test,
B.power control test,
C.low-voltage auxiliary power test,
D.output current response time test,
E.transmission out current stopping rate test,
F.efficiency test,
G.power factor test.
3. control guide test:
A.charging control state test,
B.charging connection control timing test,
C.control guide voltage limit test,
D.communication interruption test,
E.protection grounding continuity loss test,
F.connection detection signal disconnection test,
G.battery voltage and communication message match test,
H.battery voltage exceeds the charger range test,
I.draw battery two protection function vehicle zu high allowable total voltage mismatch test,
J.charging demand is greater than Battery parameters test.