Active Member
|
[China]
Contact name:sales
JIANGYIN TOPSUN TECH CO., LTD |
|
|
7KW 32A EV Charging Extension Cable IP65 J1772 Electric Car Extension Cords
EV Charging Cable
1.Humanized design
2.easy to use
3. OEM Original Factory
4.exceed 10,000 times
5. Degree of protection: IP65
6.retardant grade: UL94-V0
PLUG
1. Silver plated terminal
2. Special reed structure
3. Integrated design
4.Temperature monitoring
TUV CABLE
1.International environmental
standards
2.Long service life
3.Cold and high temperature
resistant
4.TUV Certificate
High temperature resistant Type 2 plug
High quality type 1 plug
Rated power | 7kW | ||
Output | 32A | ||
No. of phases | 1-phase | ||
Contact resistance | ≤0.3mΩ (L/N) | ||
Isolation resistance | 500MΩ (1000V AC) | ||
High voltage resistance | 2600V AC | ||
Resistor coding | 680Ω | ||
Contact thermal rise | ≤50K | ||
Charge mode | IEC 62196-2, IEC 61851-1 | ||
Working humidity | 5%-95%non condensed | ||
Protection type | IP55 (plugged in) | ||
Flammability standard | UL94 V-0 | ||
Withdrawal force | 45N…80N | ||
Pluging cycles | ≥10000x (no load) | ||
Operating temperature | -25°C...+55°C | ||
Cable | 5*2.5mm2 + 1*0,75mm2 | ||
Weight | 2100g | ||
1. Firstly, the most important step is to make sure the charger is
well connected to the power.
2. Secondly, use the integrated Type 2 charging cable plug to
connect the charging station with your electric vehicle.
3. Once the charging cable has clicked in place you are ready to
start the charge.
4. Also, there is the option to activate the charging station.How
to stop the charging
1. Firstly, disconnect the Type 2 plug from the electric vehicle’s
side when you finish charging.
2. If you wish to manually stop the charging you can do this by
pressing the Emergency Button (the red button on the side of the
charger) in case of an emergency.
How to check the charging status
1. You can monitor the charging process in real time from the LED
screen display.
