Active Member
|
[China]
Contact name:sales
JIANGYIN TOPSUN TECH CO., LTD |
|
|
16A Type 2 lEC 62196 Portable EV Charger With Control Box
1. APP Control
* Setting Current: you can set the current when the power grid is overload.
* Controlling Stop & Start: Control the Stop & Start by your phone, you can control it in anywhere.
* Making an Appointment of Charging: If you want the electric vehicle to be charged in night, it is a good choice that you make an appointment of the charging by APP, it is very convenient.
* Record: you can check the charging record by APP in any time.
* The best Choice for home market
2. Load balance management:
* Restricting the total charging load protects the local grid
* Sharing the charging load cuts costs for the required electricity connection
* Choose an open type CT (current transformer) as the current sensor, It is no physical wiring between the devices, which has the advantage of open and close installation, convenient and fast wiring, no extra infrastructure or installation costs.
Specifications | Product Name | Portable EV Charger |
Plug for EV | IEC 62196 Type 2 | |
Plug for Wall Socket | UK Plug, Schuko plug, Australian plug, etc. | |
Rated Voltage | 220～250V AC | |
Rated Current | 16A VC,1 phase | |
Frequency | 50/60Hz | |
Insulation Resistance | ＞1000MΩ | |
Terminal Temperature Rise | ＜50K | |
Withstand Voltage | 2000V | |
Contact Resistance | 0.5mΩ | |
Mechanical Life | ＞10000 times no-load plug in/out. | |
Coupled Insertion Force | 45N～100N | |
Withstandable Impact | Dropping from a 1m-height and running-over by a 2T vehicle. | |
Material | Enclosure | Thermoplastic, flame retardant grade UL94 V-0 |
Cable Material | TPE/ TPU | |
Terminals/Pins | Copper alloy, silver plating | |
Ingress Protection | IP54 | |
Certification | CE/ TUV | |
Certification Standard | IEC 62196-1-2016/ IEC 62196-2-2016 | |
Charging Protection | Over current, residual current, short circuit, surge, over/under voltage, over/under frequency, and over/under temperature protection; | |
Warranty | Product Warranty | 2 years |
Work Temperature | -30℃~+50℃ | |
Work Humidity | 5%~95% | |
Work Altitude | <2000m |
Attention to know
EV chargers are splash, water and dust resistant and have been tested under strictly controlled laboratory
conditions to achieve an IP65 rating in accordance with IEC standard 62196. However, the resistance to splashes, water and dust is not permanent and may weaken over time under normal use. Damage caused by liquids is not covered by the warranty.
To prevent damage to your charger from liquids, please avoid the following situations :
1. Exposing the charger to pressurised water or high velocity water flow.
2. Intentionally submerging the charger in water.
3.Operating the charger beyond the recommended temperature range or in extremely humid environments
4. Dropping the charger or subjecting it to other shocks.
5. Disassemble the charger, including removing the screws.
If the charger comes into contact with liquid, turn off all power until it is completely dry.
Placing the unit in front of a fan so that cold air is blowing directly on the charging connector may help to speed up the drying process.
Do not use an external heat source to dry the charger, or insert foreign objects such as cotton swabs or paper towels into the charging port.
