Active Member
|
[China]
Contact name:sales
JIANGYIN TOPSUN TECH CO., LTD |
|
|
Type1 J1772 Plug Level 2 OCPP 1.6J EV Charging Station For Commercial Charging
1. APP Control
* Setting Current: you can set the current when the power grid is overload.
* Controlling Stop & Start: Control the Stop & Start by your phone, you can control it in anywhere.
* Making an Appointment of Charging: If you want the electric vehicle to be charged in night, it is a good choice that you make an appointment of the charging by APP, it is very convenient.
* Record: you can check the charging record by APP in any time.
* The best Choice for home market
2. Load balance management:
* Restricting the total charging load protects the local grid
* Sharing the charging load cuts costs for the required electricity connection
* Choose an open type CT (current transformer) as the current sensor, It is no physical wiring between the devices, which has the advantage of open and close installation, convenient and fast wiring, no extra infrastructure or installation costs.
Type1 J1772 Plug Level 2 OCPP 1.6J EV Charging Station For Commercial Charging | ||
Specification |
Model
| / |
AC Nominal Input | Phase | 1phase+neutral+PE |
Voltage | 230V±10% | |
Frequency | 50HZ | |
AC Nominal Output | Voltage | 230v±10% |
Current | 32A | |
Power | 7KW | |
Structure Design | Housing Material | PC+PBT |
Front Panel | Temper glass | |
Installation Method | Wall-mount/Floor-stand | |
Charging Outlet | 4M charging cable(Type1/Type2) | |
LED Indicator | Green /yellow/red/blue for different status | |
LCD Display | Display charging data | |
Emergency Stop Button | Yes | |
RFID Function | 2pcs cards | |
Environmental Index | Protection Level | IP65 for Box |
Temperature/Humidity | -30-50℃/5%-95% without condensation | |
Working altitude | ＜2000M | |
Application Site | Indoor /Outdoor | |
Security Protection |
Multiple Protection | Over current&Under voltage&over voltage&Residual current&Surge protection&short circuit&over temperature&ground fault¤t leakage protection |
Safety Standard | EN61851-1 | |
MTBF | 10000 Hours | |
Warranty | 2 years | |
Package Information | Protection Dimension | 398*324*120mm |
Package size | 490*385*275mm | |
Net Weight | 8kg | |
Gross Weight | 10.5kg | |
External Packing | carton | |
Optional Parts | Network Gateway | Ethernet/WIFI/4G communication |
Communication Protocol | OCPP1.6(JSON) | |
RCD | TYPE B | |
Energy Meter | MID certified | |
To prevent damage to your charger from liquids, please avoid the
following situations :
1. Exposing the charger to pressurised water or high velocity water
flow.
2. Intentionally submerging the charger in water.
3.Operating the charger beyond the recommended temperature range or
in extremely humid environments
4. Dropping the charger or subjecting it to other shocks.
5. Disassemble the charger, including removing the screws.
If the charger comes into contact with liquid, turn off all power
until it is completely dry.
Placing the unit in front of a fan so that cold air is blowing
directly on the charging connector may help to speed up the drying
process.
Do not use an external heat source to dry the charger, or insert
foreign objects such as cotton swabs or paper towels into the
charging port.
