|
[China]
Trade Verify
Address: 117-119, building 28, Nanfang stainless steel trading center, Xinwu District, Wuxi
Contact name:david
EUROTECH FASTENERS (WUXI) CO., LTD |
|
Verified Suppliers
|
|
|
U-Bolt Wire Rope Clip Din 741 Galvanised Wire Rope Grip Rigging 3Mm
4mm 6mm Stainless Steel
Description
DIN741 Malleable Wire Rope Clip
DIN741 malleable wire rope clips are a light duty malleable iron wire rope clamp, composed of a cast saddle, a U-bolt and two nuts, this wire clip's installtiono is very easy, and designed to fix the loose end of the loop back to the wire rope.
Malleable wire rope clips are designed for lighter loads but offer considerable cost advantages. Applications that malleable wire rope clamps can be used for include fencing, guard rails, hand rails, etc. drop forged wire rope clips are recommended for overhead lifting applications.
Wire rope clip also called as U-bolt, Bulldog clip or wire clamp is used to clamp the looped back wire rope as to form an eye. It is consisted by a U-bolt and has a saddle secured by 2 nuts.
The wire rope clip size is compatible with the wire rope diameter, inappropriate selection of wire rope clip size will cause damage to the wire rope or insuffient clamping force.
Incorrect installation of wire rope clip will result in 40% reduction of working eficiency. Furthermore, bigger diameter of rope shall apply more wire rope clips with appropriate tail length to ensure the consistent working load limit.
Material: Malleable lron
Finish: Electro galvanized.
Sizes up to 50MM are available.
Wire Rope Clip also called as "U-bolt","Bull dog clip" or "Wire Clamp" is used to clamp the looped back wire rope as to form an eye. It is consisted by a U-bolt and has a saddle secured by 2 nuts. Design and Production Standards are conformed to BS EN 13411-5.
The Wire Rope Clip size are compatible with the Wire Rope diameter, inappropriate selection of wire rope clip size will cause damage to the wire rope or insufficient clamping force.
Incorrect installtion of wire rope clip will result in 40% reduction of working efficiency. Furthermore, bigger diameter of rope shall
apply more wire rope clips with appropriate tail length to ensure the consistent working load limit. Below are some important guidelines for reference.
The terminal efficiency for wire rope size from 3mm to 22mm is 80%, and size from 25mm to 89mm is 90% with appropriate torque apply on the nut.
Sling made by using wire rope clip are not suitable for lifting purposes, only use it for static load securing.
5mm stainless steel DIN 741 wire rope grips are a simple way to create eyes in 4mm & 5mm cable diameters.
Specification
| Item | M2-M40 stainless steel wire rope clamp |
| Standard | DIN741 DIN1142 |
| Dia | M2-M40 |
| Material | stainless steel304,316 |
| Surface treatment | Plain, Polish |
| Packaging Details | bulk packing in cartons, then put on pallets, or as per your requests. |
| Customer design | our experienced engineer team can developed the products and manufacture in accordance with samples, drawings or only ideas |
| Price terms | FOB, CIF, CFR, EXW, and others. |
| Payment terms | T/T, L/C, western union, paypal, etc. |
| Delivery method | by sea, by air or by express service |
| Certifications | ISO9001 |
Our Product Catalogue
| Screw | Self Drilling Screws |
| Hex Self Tapping Screws | |
| Hexagon Socket Set Screws | |
| Hexagon Head Wood Screws | |
| Hex Socket Flat Countersunk Head | |
| Hexagon Socket Button Head Screw | |
| Cross Recessed Pan Head Self Tapping Screw | |
| Bolt | Hexagon Head Bolt |
| Lifting Eye Bolt | |
| Wing Bolt | |
| Carriage Bolt | |
| Swing Bolt | |
| Stud bolt | |
| T Shaped Bolt | |
| U Shaped Bolt | |
| Threaded Pipe Nipple | |
| Washer | Flat Washer |
| Spring Washer | |
| Lock Washer | |
| Tab Washer | |
| Retaining Washer | |
| Nut | Hexagon Nuts |
| Square Nut | |
| Eye Nut | |
| Wing Nut | |
| Lock Nut | |
| Self Clinching Nuts | |
| Anchors | Hook Anchor Bolts |
| Hammer Anchor | |
| Sleeve Anchor | |
| Expandable Bolt Anchor | |
| Rivet Nut | Hex Rivet Nuts |
| Csk Rivet Nut | |
| Blind Rivet Nut | |
| Flat Head Rivet Nut | |
| Slotted Rivet Nut | |
| Knurled Rivet Nut | |
| Floating Rivet Nut | |
| Self Clinching Standoff | |
| Rivet | Blind Rivet |
| Other Hardware Fasteners | Adapter Sleeve Bushing ,Dowel Pin,Locating Pin,Steel Foot Cups etc. |
FAQ
Q: What is your main products?
A: Our main products are fasteners: bolts, screws, rods, nuts,
washers, anchors and rivets.Meantime, our company also produces
stamping parts and machined parts.
Q: What is your manufacturing capacity?
A: Our production capacity exceeds 3 million pieces per week. We
currently have more than 50 production lines and we are constantly
growing.
Q: how can we guarantee quality?
A: Always a pre-production sample before mass production;
Always final Inspection before shipment;
Q: How to ensure that every process's quality
A: Every process will be checked by our quality inspection
department which insures every product's quality. In the production
of products, we will personally go to the factory to check the
quality of products.
Q: What is your payment method?
A: 30% value of T/T in advance and other 70% balance on B/L copy.
For small order less than1000USD, would suggest you pay 100% in
advance to reduce the bank charges.
Q: Can you provide a sample?
A: Sure, Our sample is provided free of charge, but not including
courier fees.
Q: How long is your delivery time?
A: We have large stock, 3 days for stock items,7-15days for
production.
Q: What's your price terms ?
A: EXW/FOB/CIF/CFR/FCA/CPT/CIP/DAP/DDP
Q: Wonder if you accept small orders?
A: Do not worry. Please feel free to contact us, in order to give
our clients more convenience ,we accept small order.
Q: Can we print our own logo ?
A: Yes, we can make it according to your request.
Please feel free to contact us for detailed information:
