3.5W 40km 10G XFP DWDM Optical Transceiver Module

PN: LXDxxX-3LCD40

10G DWDM XFP Transceiver XFP DWDM C-band ITU-T 1534.64~1561.83nm  Duplex LC

Features

      Ø Wavelength selectable to C-band ITU-T grid wavelengths

      Ø Suitable for use in 100GHz channel spacing DWDM systems

      Ø XFP MSA Rev 4.5 Compliant

      Ø Data rate from 9.95Gbps to 11.3Gbps

      Ø No Reference Clock required

      Ø Cooled EML and PIN receiver

      Ø link length up to 40km

      Ø Low Power Dissipation 3.5W Maximum

      Ø XFI and lineside loopback Mode Supported

      Ø -5ºC to 70ºC Operating Case Temperature

      Ø Diagnostic Performance Monitoring of module temperature,

      Ø Supply Voltages, laser bias current, transmit optical power, and receive optical power

      Ø RoHS6 compliant (lead free)

Applications

      Ø SONET OC-192 & SDH STM 64

      Ø 10GBASE ER/EW

      Ø 40km 10G Fiber Channel

      Ø DWDM Networks

Description

LINKOPTO EXDXX92-3LCD40 Transceiver exhibits excellent wavelength stability, supporting operation at 100 GHz channel, cost effective module. It is designed for 10G DWDM SDH, 10GBASE-ER/EW and 10G Fiber- Channel applications.

The transceiver consists of two sections: The transmitter section incorporates a colded EML laser. And the receiver section consists of a PIN photodiode integrated with a TIA. All modules satisfy class I laser safety requirements. LINKOPTO DWDM XFP transceiver provides an enhanced monitoring interface, which allows real-time access to device operating parameters such as transceiver temperature, laser bias current, transmitted optical power, received optical power and transceiver supply voltage.

Quality Control

Cisco Compatible List