Copper 10/100/1000Base RJ45 SFP Module 100M Transmission Compatible With Huawei

10/100/1000M Copper-T SFP 100M Reach RJ45 Compatible with Huawei

Features

Ø Up to 1.25Gb/s bi-directional data links

Ø Hot-pluggable SFP footprint

Ø TX Disable and RX Los/without Los function

Ø Compact RJ-45 connector assembly

Ø Fully metallic enclosure for low EMI

Ø10/100/1000Mbps compliant in host systems with SGMII interface

Ø Low power dissipation (1.05 W typical)

Ø Access to physical layer IC via 2-wire serial bus

Ø Operating case temperature range of

           0°C to +70°C (Commercial)

           -20°C to +85°C (Extend)

Applications

Ø Gigabit Ethernet

Ø Fiber Channel

Ø Switched backplane applications

Ø Other optical transmission systems

Ø Switch to Switch interface

Ø Router/Server interface

Description

linkopto T2-RJ45 Copper Small Form Pluggable (SFP)transceivers is high performance, cost effective module compliant with the Gigabit Ethernet and 10/100/1000BASE-T standards as specified in IEEE 802. 3-2002 and IEEE 802.3ab, which supp- orting 1000Mbps data- rate up to 100 meters reach over unshielded twisted-pair category 5 cable.

The module supports1000Base full duplex data-links with 5-level Pulse Amplitude Modulation (PAM) signals. All four pairs in the cable are used with symbol rate at 250Mbps on each pair.

linkopto module provides standard serial ID information compliant with SFP MSA, which can be accessed with address of A0h via the 2wire serial CMOS EEPROM protocol. The physical IC can also be accessed via 2wire serial bus at address ACh.

Quality Control

linkopto Package

Cisco Compatible List