Home Companies XI'AN EXCELLENT ELECTROMECHANICAL CO.,LTD

lift load weighting device/lift parts load cell EWD-L-J2

Active Member

Contact Us

[China]

Address: 7D,Block A,Olympin Buiding,8th Chang An North Road,Xi'an,Shaanxi,China

Contact name:Yolly

XI'AN EXCELLENT ELECTROMECHANICAL CO.,LTD

lift load weighting device/lift parts load cell EWD-L-J2

Country/Region	china
City & Province	Shaanxi

Product Details

EWD-L-J2 Controller and load sensor ,elevator load weighting device ,load cell

Declaration:

In any case, our part is only responsible for the quality of products in warranty period.

Description:

1. State Indication　－　Flickering:About “Once per Second”；

2. Button Operation　－　Press:Press and release soon；Hold:Press constantly；

3. Relay －　Keep the state of Picking-up in the period of system being unadjusted or faulty；

Main Features:

1. With the adoption of integrated designing of “C: Concave type sensor”, it can be welded directly on elevator car bearing beam;

2. Directly outputting full-load or overload signal depending on the change of elevator car payload

3. Simple adjustment, high precision of measurement and quick and easy installation.

Technical specification:

⒈	Application Range	Being applicable to all elevator with payload of 500㎏～20000㎏ for full-load and overload signal
⒉	Sensitivity	For the elevator with rated load of 1 ton, it is 5Kg
⒊	System Error	≤1.5％(5～40℃)
⒋	Output Mode	Switching Signal:Full-load and overload Dynamic Close and Dynamic Open contact
⒌	Operation Temperature	-25～55℃
⒍	Power Source	DC 24V(±10%),Operating current for the whole set≤100mA

Intensity exceeding the above listed parameter limits may cause the system abnormality or its permanent damage.

Description of Other Indication States:

	Display Code	Implication
1	FY	System Startup
2	PC	Sensor Resetting
3	PP	Get into the status of operation parameters modification
4	Lo	Ready for Autotuning Operation
5	PL	Autotuning No load parameters	(Static Displaying represents preparative status,twinkling displaying for the end of testing
6	PH	Autotuning Rated load parameters
7	EL	No payload is detected by sensor	Check the cable of the sensor, system power and payload
8	EH	Exceeding the measuring range of maximum load	Check the cable of the sensor, system power and payload
9	Pn	Saved
10	EA	Saving Failure	Remodify the operation parameters

After system commissioning, press and hold 【◎】 in normal operation,〖J1〗／〖J2〗will flicker alternately,at this time, J1/J2 outputs alternately.

Promise:

1. If this system appears any quality problem of product itself in 1 year after delivery, it will be replaced freely(damage of the product seal will not be treated).

2.For any system abnormality in adjustment or operation, please contact our company directly.

Others:

Packing List	Controller of EWD-L-J2 Elevator Loading Device	1	Type EWD-GC:sensor and its accessories	1 Set
Packing List	Screw Sets M4 X 40	2 Sets	System Instruction Manual	1 Copy