Home Companies TS Lightning Protection Co.,Limited

Computer Equipment Lightning Surge Protector D SUB 9 / 15 Pins RS485 / RS422 / RS232

Active Member

Contact Us

[China]

Address: Hongdiyuan Industrial Park, Wufeng Avenue, Linjiang Town, Jiangdong New District, Heyuan, Guangdong, P.R.C.

Contact name:Franklin

TS Lightning Protection Co.,Limited

Computer Equipment Lightning Surge Protector D SUB 9 / 15 Pins RS485 / RS422 / RS232

Country/Region	china
City & Province	heyuan guangdong
Categories	Solar Chargers

Product Details

D-SUB 9 / 15 pins RS485 / RS422 / RS232 surge protector for computer equipment

TS-RSP series RS232 surge protector for computer equipment is used at LPZ 2-3 boundary, provide surge protection for RS485, RS422 or RS232 signal devices from damages, such as surge voltages, operating over voltages, electrostatic discharging and so on according to IEC 61643-21 standard.

Technical Data S1

Model	TS-RSP9	TS-RSP15
Nominal voltage	12V-	5V-
Rated voltage (max. continuous voltage)	15V-	8V-
Lightning impulse current (10/350)	/	/
Nominal discharge current (8/20)	100A (line-SG)	200A (line-SG)
Nominal discharge current (8/20)	100A (SG-PG)	800A (SG-PG)
Max. discharge current (8/20)	200A (line-SG)	400A (line-SG)
Max. discharge current (8/20)	200A (SG-PG)	1.3kA (SG-PG)
Voltage protection level at In	≤24V (line-SG)	≤16V (line-line)
	≤200V (SG-PG)	≤16V (line-SG)
		≤16V (SG-PG)
Voltage protection level at 1kV/ms	≤21V (l ine-SG)	≤11V (line-line)
	≤90V (SG-PG)	≤11V (line-SG)
		≤11V (SG-PG)
Bandwidth	10 MHz	4 MHz
Response time	≤1ns (line-SG)	≤1ns (line-SG)
Response time	≤1ns (SG-PG)	≤1ns (SG-PG)
Max. data transmission rates	1Mbits/s
Operating temperature range	-40°C...+80°C
Relative humidity	≤ 95% (25°C)
Protective lines	Line: 8/ SG/PG	2 two-core lines
Pinning	Line: 1/2/3/4/6/7/8/9, SG: 5 (standby lines disconnected)	2/9 1st pair; 4/11 2nd pair; 8:SG: 1:PG (standby lines disconnected )
Mounting in	D-Sub, 2 threaded screws
Connection (input / output)	D-sub 9 socket/plug	D-sub 15 socket/plug

Technical Data S2

Features

High discharge capacity, low voltage protection level, quick response
Do not impact the normal work of data management devices and system
Apply for high speed transmission devices

Installation Instruction

This RS485 / RS422 / RS232 surge protector for computer equipment is connected in series to the protected device, installation in the partition of LPZ 2-3 interface;
In order to prevent lightning induction, LPZ 0A -1 and LPZ 1-2 interface must install additional surge protection products.
The out terminal of the surge protector s/b connected to the protected devices.
SPD's earthing lead must be connected to nearby earthing BusBar or the metal earthing enclosure of protected device.
After above, you should ensure the circuit is functioning.