Hebei Huayang Steel Pipe Co., Ltd. |
|
Red Painting Q345 St37 St42 ASTM 4140 Welded Steel Pipe
The process of high-frequency welded pipe production depends on the product variety, from raw materials to finished products need to go through a series of processes, the completion of these processes require a variety of mechanical equipment and welding, electrical control, detection devices, these devices and devices in accordance with different processes with a variety of reasonable layout of the process, high-frequency welded pipe typical process: open book – strip leveling – head and tail shear – steel butt welding – live storage – forming – welding – remove the burr – sizing – initial inspection – straightening of pipe – pipe section processing – water pressure test – flaw detection – printing and coating – finished product.
High-frequency welding is the use of continuous contact with the
workpiece surface of the high-frequency current generated by the
heat generated by heating and in the case of the application of
forging force, the workpiece metal to achieve a series of welding
methods. It is similar to ordinary resistance welding, but there
are many important differences.High-frequency welding for carbon
steel pipe production has been 40 years of history. High-frequency
welding has a large power supply, the different materials, caliber
and wall thickness of the steel pipe can achieve a higher welding
speed (higher than the maximum welding speed of welding more than
l0 times). Therefore, the high-frequency welding production of
general-purpose steel pipe has a high productivity because of
high-frequency welding speed, to the pipe to remove the burrs
difficult, which is the current high-frequency welded steel pipe is
not acceptable for the chemical industry, nuclear industry one.
From the welding material, high-frequency welding can be welded all
types of steel pipe.
Important part of high frequency welded pipe production process
1. In the process of high-frequency welded pipe production, how to
ensure that product quality in line with the requirements of
technical standards and customer needs
Material | 10#,20#,45#,Q345,A106-B,20Cr,15CrMo,St37,St42,ASTM 4140 etc. |
Standard | JIS,GB,ASTM,DIN |
Technique | Cold Rolled/Hot Rolled |
OD | 10~335mm,1/2"~12" |
Wall Thickness | 2~25mm,SCH10~XXS |
Length | 5.8m~12m/customized design |
Surface Treatment | black painting, varnish, oil, galvanized, anti corrosion coatings |
Packaging | 1. Bundle packing. |
2. Bevelled end or plain end or warnished as per buyer's required. | |
3. Marking: as per customer's requests. | |
Payment Terms | T/T,L/C etc |
Testing | Chemical Component Analysis, Mechanical Properties, |
Exterior Size Inspection, hydraulic testing etc. | |
Advantages | 1. Reasonable price with excellent quality |
2. Abundant stock and prompt delivery | |
3. Rich supply and export experience, sincere service | |
4. Reliable forwarder, 2-hour away from port. |