Active Member
|
[China]
Address: 23A2, Suhao Building, Nanxin Road, Nanshan District, Shenzhen, China
Contact name:Du
Shenzhen Topfan Technology Development Co., Ltd. |
|
|
50x50x15mm Waterproof Moisture proof DC Fan, 24V DC Dustproof Fan
And Guard ,Power Axial Fan
50x50x15mm DC Fan, low noise and long life expectancy, are commonly used in HVAC systems,machinery for heating,
ventilating, air conditioning, drying, dehumidifying, etc. Such as
electronic air cleaner , hand dryers,electronic oven, gas oven,
electronic fireplace, gas fireplace, electric fan good balance
condition,etc.
Description:
● Brushless DC Fan, Axial DC Fan, DC Motor Fan,CPU Fan, Computer
case fan, laptop fan, PWM Fan, FG cooling fan, LED Digital signage
● Various Size
● High speed , Middle speed, Low speed
● Plastic Frame or Die-Cast Aluminum Frame and Plastic impeller
● 5 blades 7 blades or 9 blades
● 5V DC 12V DC 24V DC or 48V DC
● Ball bearing or Sleeve bearing or Hydraulic bearing
● Terminal or Lead wire
● Waterproof explosion proof or high proof are can be
satisfied.
Important Note:
Rated Current: Rated Current shall be measured after 3 minutes of
continuos rotation at rated voltage.
Rated Speed: Rated Speed shall be measured after 3 minutes of
continuos rotation at rated voltage
Start Voltage: The voltage which is able to start the fan to
operate by suddenly switching “ON”
Dropping test standard: Drop a minimum packing box in a height of
30 cm for perpendicular free falling motion to the surface of
wooden plate of 10 cm. After test, connect the fan to the power,
the fan still in normal operation.
A. General Specifications:
| Model | Bearing Type | Rated Voltage | Operating Voltage | Input Current | Input Power | Speed | Max Air Flow | Max Static Pressure | Noise | Weight | ||
| Part No. | B.S | VDC | VDC | Amp | Watt | RPM | CFM | m3/min | Inch-H2O | pa | dB-A | g |
| MX5015AB(S/Y)H5 | B.S.Y | 5 | 3.5-5.5 | 0.50 | 2.50 | 6000 | 14.74 | 0.42 | 0.21 | 52.76 | 34.00 | 29.00 |
| MX5015AB(S/Y)M5 | B.S.Y | 5 | 3.5-5.5 | 0.35 | 1.75 | 5500 | 13.29 | 0.38 | 0.18 | 45.11 | 31.00 | 29.00 |
| MX5015AB(S/Y)L5 | B.S.Y | 5 | 3.5-5.5 | 0.25 | 1.25 | 5000 | 12.86 | 0.36 | 0.16 | 40.89 | 27.00 | 29.00 |
| MX5015AB(S/Y)D5 | B.S.Y | 5 | 3.5-5.5 | 0.20 | 1.00 | 4500 | 11.29 | 0.32 | 0.13 | 32.36 | 25.00 | 29.00 |
| MX5015AB(S/Y)U1 | B.S.Y | 12 | 7.0-13.8 | 0.20 | 2.40 | 6500 | 15.90 | 0.45 | 0.25 | 62.57 | 36.00 | 29.00 |
| MX5015AB(S/Y)H1 | B.S.Y | 12 | 7.0-13.8 | 0.16 | 1.92 | 6000 | 14.74 | 0.42 | 0.21 | 52.76 | 34.00 | 29.00 |
| MX5015AB(S/Y)M1 | B.S.Y | 12 | 7.0-13.8 | 0.14 | 1.68 | 5500 | 13.29 | 0.38 | 0.18 | 45.11 | 31.00 | 29.00 |
| MX5015AB(S/Y)L1 | B.S.Y | 12 | 7.0-13.8 | 0.12 | 1.44 | 5000 | 12.86 | 0.36 | 0.16 | 40.89 | 27.00 | 29.00 |
| MX5015AB(S/Y)D1 | B.S.Y | 12 | 7.0-13.8 | 0.10 | 1.20 | 4500 | 11.29 | 0.32 | 0.13 | 32.36 | 25.00 | 29.00 |
| MX5015AB(S/Y)U2 | B.S.Y | 24 | 14.0-27.6 | 0.12 | 2.88 | 6500 | 15.90 | 0.45 | 0.25 | 62.57 | 36.00 | 29.00 |
| MX5015AB(S/Y)H2 | B.S.Y | 24 | 14.0-27.6 | 0.10 | 2.40 | 6000 | 14.74 | 0.42 | 0.21 | 52.76 | 34.00 | 29.00 |
| MX5015AB(S/Y)M2 | B.S.Y | 24 | 14.0-27.6 | 0.08 | 1.92 | 5500 | 13.29 | 0.38 | 0.18 | 45.11 | 31.00 | 29.00 |
| MX5015AB(S/Y)L2 | B.S.Y | 24 | 14.0-27.6 | 0.07 | 1.68 | 5000 | 12.86 | 0.36 | 0.16 | 40.89 | 27.00 | 29.00 |
| MX5015AB(S/Y)D2 | B.S.Y | 24 | 14.0-27.6 | 0.06 | 1.44 | 4500 | 11.29 | 0.32 | 0.13 | 32.36 | 25.00 | 29.00 |
B: Electrical Specification:
ITEM |
| Specification. Condition | |||
Locked Rotor Protection | □ | Safety Condition | |||
| Auto power off after locked at rated voltage for 1sec | ||||
Polarity Protection | ■ | Open circuit when Vcc&GND are exchanged | |||
□ | Circuit won’t be burned within 5 seconds when Vcc &GND are exchanged | ||||
Insulation Resistance | 10MΩ Between unshielded wire and frame at 500VDC/min | ||||
Dielectric Strength | 5mA Max/ Measured b/w lead wire(+)and frame at 500VAC/min | ||||
Special Function | □ | Soft Start | □ | Current Limiter | |
C. (Main Materials, Parts Specification)
Bearing | ■(Dual Ball Bearing) | □ | (Sleeve Bearing) | |||||||
Frame | ■ | PBT of UL94V-0. | □ | Die-cast Aluminum Alloy | ||||||
Impeller | ■ | PBT of UL94V-0. | □ | Steel | ||||||
Bobbin | PBT of UL94V-0. | |||||||||
Lead Wire | ■ | Red(+) | ■ | Black(-) | □ | Blue(PWM) | UL 1571 28# | |||
□ | Yellow(FG) | □ | White(RD) | 2 wires 100±10mm | ||||||
Connector | No | |||||||||
Tube | No | |||||||||
Dimensions (Unit:mm)
Fan Performance Curve:
You can choose the shipping way by yourself .
You can choose the freight forward company by yourself .
We can arrang the shipment according to your require .
If you have any requirements you could contact me soon .
1.Samples delivery time is 7 working days . ( The quantity of free samples among 2 - 3 pcs . )
2 . Fans quantity : 1K ~ 5K ,the delivery time is 7 ~ 10 working days ;
Fans quantity : over 5K , the delivery time is 15 - 20working days
3 . International express : UPS / DHL / FEDEX and so on .
1.We are professtional and experienced manufature of Axial Fan in China.
2.Customization, the size and functions of fan manufacture according to your demands.
3.We’ll reply you in 24 hours after you send inquiry to us.
4.We holding the principle of good faith to manage our company for 25 years.
If you want another rpm or voltage or other reqirement , pls
contact me for more details , thanks!
For Special Cooling Fan , Such as : moistureproof , waterprrof ,
turbocharger , soft start , Reversible , temperature control , PWM
speed control , the RD alarm and the FG signal etc , pls contact me
free .
Any more information , please feel free to contact Helen
Skype : helen860615
Tel : 86 755 26070926
Cell Phone: 0086-15818540201
We will reply you within 2 hours. Thanks
