Active Member
|
[China]
Address: Building 21, Shangding Enterprise Park, Yubei District, Chongqing, China
Contact name:Gelon
Chongqing Aorun Industrial Co., Ltd. |
|
|
Quick Detail:
| Name | Art resin5110 | Usage | Construction, Woodworking, DIY Crafts Epoxy |
Mixing Ratio | Two Components Liquid, 1:1 | Advantage | Low heat,no odor,self-defoaming,High Temperature Resistance, High Gloss |
Description:
1. 5110 Epoxy Resin is a clear epoxy resin that cures at normal and
low temperatures.
2. It has good alignment, natural foam, low viscosity, high
hardness and high strength.
3. It can be cured at room temperature or by heating. It is for
crystal board, marble board, 3D floor insulation, metal floor,
kitchen table top, resin coating, high hardness coating on any
surface; and other electronic parts, waterproof filling, secret
masking, etc.
4. Normal condition can be reached 5-7 years against yellow.
5. The maximum thickness of a pot can reach 5-7cm.
| Items | Units/conditions | Technical Data |
| Viscosity | Shore-D | 80-85 |
| Volume resistivity | 25℃/ Ω./ cm | 4.3x1015 |
| Surface resistivity | 25℃/ Ω. | 2.6x1014 |
| Dielectric strength | 25℃ KV/MM | 25 |
| Coefficient of linear expansion | CM/K | <6.1x10-5 |
| Glass transition temperature | ℃ | >90 |
| Temperature resistant | ℃ | -60~120 |
Precautions:
1. Please clearly check the label on the package before matching
the glue, and confirm the ratio of the ratio of the A agent to the
B agent.
2. The glue tool should be clean and dry, no dust, water and oil.
3. Mix the A and B components according to the proportion and stir
evenly to avoid unevenness or lack of hardness.
4. Since the glue starts to react and heat, the more the amount of
glue is, the more heat is generated, and the curing time is also
shortened. The shorter the time that can be used, so please apply
the proper amount of glue according to the time of filling. So as
not to cause waste.
5. After the glue is finished, seal the AB agent package to prevent
debris or moisture absorption, and ensure the normal use of the
next time.
6. A very small number of people exposed to the glue for a long
time will produce mild skin allergies, it is recommended to wear
protective gloves when used, stick to the skin can be wiped off
with Tianna water or alcohol, and cleaned with detergent.
7. Before mass use, please try a small amount, master the use of
the product skills, so as not to make mistakes.
