Active Member
|
[China]
Address: No.22 Zhenggang West Road, Anping, Hebei, China 053600
Contact name:Eon Xie
HESLY METAL MESH GROUP LIMITED |
|
|
HeslyGrating drainage cover systems combine our most popular bar gratings and embed
frames in a complete set for economic, simple installation on
construction projects. Systems are available in standard duty for
pedestrian loads and heavy duty for demanding vehicular traffic.
HeslyGrating allows the specifier to combine any of our Standard
Duty pedestrian grates or Heavy Duty vehicular gratings with any of
our popular Embed Frames. Unlike cast iron or molded trench
products, this flexible system allows the user to specify the exact
clear opening (“S” dimension) desired.
All gratings are provided with plain surface (the optional serrated
surface is available when specified) and open ends are trench
banded to maximize drain capacity.
Unless otherwise specified, all trench frames and grating are hot
dip galvanized after fabrication in accordance with ASTM
Specification A123.
Carbon Steel Finish Options
 |  |  |  |
Bare Steel Mill finished carbon steel bars without additional coating. Will show discolorationfrom welding and fabrication. Subject to rusting. | Hot Dip Galvanized Zinc coating applied in accordance with ASTM A123. Provides long lasting corrosion resistance.
| Powder Coating One coat of HeslyGratings' standard coating. Stand colors are green, black, red, and blue etc. | Other Finishes: PVDF etc Specialty coatings may be specified in a wide range of colors. painting, or epoxy paints. |
Load Capacity of Heavy Duty Steel Grating
| Important ! The charge-capacity at the grating is determined by the height and thickness of the bearing-bars (=supporting-bars). The bearing-bar must always be supported. Therefore, the bearing-bar is in all our documents = first dimension. Cross-bars and bordering off the grid contribute to the stability. |  |
| Series | Pitch of Bearing bar | Cross-bar Pitch | Specification of bearing bar load width×thickness | |||||
| 20×3 | 25×3 | 32×3 | 40×3 | 20×5 | 25×5 | |||
| 1 | 30 | 100 | G203/30/100 | G253/30/100 | G323/30/100 | G403/30/100 | G205/30/100 | G255/30/100 |
| 50 | G203/30/50 | G253/30/50 | G323/30/50 | G403/30/50 | G205/30/50 | G255/30/50 | ||
| 2 | 40 | 100 | G203/40/100 | G253/40/100 | G323/40/100 | G403/40/100 | G205/40/100 | G255/40/100 |
| 50 | G203/40/50 | G253/40/50 | G323/40/50 | G403/40/50 | G205/40/50 | G255/40/50 | ||
| 3 | 60 | 50 | G253/60/50 | G253/60/50 | G403/60/50 | G205/60/50 | G255/60/50 | |
| Series | Pitch of Bearing bar | Cross-bar Pitch | Specification of bearing bar load width×thickness | |||||
| 32×5 | 40×5 | 45×5 | 50×5 | 55×5 | 60×5 | |||
| 1 | 30 | 100 | G325/30/100 | G405/30/100 | G455/30/100 | G505/30/100 | G555/30/100 | G605/30/100 |
| 50 | G325/30/50 | G405/30/50 | G455/30/50 | G505/30/50 | G555/30/50 | G605/30/50 | ||
| 2 | 40 | 100 | G325/40/100 | G405/40/100 | G455/40/100 | G505/40/100 | G555/40/100 | G605/40/100 |
| 50 | G325/40/50 | G405/40/50 | G455/40/50 | G505/40/50 | G555/40/50 | G605/40/50 | ||
| 3 | 60 | 50 | G325/60/50 | G405/60/50 | G455/60/50 | G505/60/50 | G555/60/50 | G605/60/50 |
NOTE: Other specifications can be made as per requirements. | ||||||||
 |  |  |
| Welded Bar Grating China Factory | Steel Bar Grating Trench Cover | Hot Dipped Galvanized Grating |
 |  |  |
| Bar Grating Drain Trench | Steel Grating Drainage Cover | Gal. Grating Trench |
 |  |  |
|---|---|---|
| Steel Grating Clips | Steel Bar Grating Clips | Steel Grating Clips |
 |  |  |
| Hot Dipped Galvanised Bar Grating | Welded Bar Grating Exporter | Container Loading |
Just let us know below the information marked on the drawing.
 | Required Information for a formal quotation
|
Contact us for a FREE prompt quotation !
 | HeslyGrating Industries - China |
| Tel: +86-318-7888890 | |
| Mobile: +86-188 3181 6606 | |
| Fax: +86-318-796 3989 | |
| E-mail: grating@hesly-group.com | |
| www.heslygrating.com |
