BOTO GROUP LTD |
Verified Suppliers
|
|
Factory High Accelerated Stress PCT high pressure Test Chamber
Features:
1. Adopting dual-circuit structure of imported high temperature-resistant solenoid valve, which reduces the failure rate to the greatest extent.
2. Independent steam generation chamber, avoid direct impact of steam on the product, so as not to cause partial damage to the product.
3. The labor-saving structure of the door lock solves the shortcomings of the disc-type handle of the first generation product which is difficult to lock.
4.Exhaust the cold air before the test; the design of the exhausted cold air (exhaust air in the test barrel) during the test improves the pressure stability and reproducibility.
5. Ultra-long-term experiment running time, long-term experiment machine running for 1000 hours.
6. Water level protection, detection and protection through water level sensor in the test room.
7.tank pressure resistance design, the pressure resistance of the cabinet (140 ℃) is 2.65kg, which meets the water pressure test of 6kg.
8. Two-stage pressure safety protection device adopts two-stage combination controller and mechanical pressure protection device.
9. Safety protection pressure release button, two-stage automatic pressure release button of emergency safety device
10. Full touch controller, support U disk export history
Product parameters
Model | ||
Studio size | PCT40: 400mm x L500 mm round test chamber | |
Performance | Temperature and humidity range | +100 °C ~ +135 °C (saturated vapor temperature), 100 vapor humidity |
Temperature fluctuation | ±0.5°C | |
Humidity distribution mean | 3% | |
Pressurization time | 0.00 Kg ~ 1.04 Kg / cm2 Approximately 45 points | |
Temperature display accuracy | 0.1 ° C | |
Pressure fluctuation | ±0.02Kg | |
Temperature and humidity operation control system | Controller | Imported LCD digital display P, I, D + S, S, R. Micro PLC + color touch screen |
Range of accuracy | Setting accuracy: temperature ±0.1 °C, indicating accuracy: temperature ± 0.1 ° C, resolution: ± 0.1 ° C | |
Temperature Sensor | Platinum resistance PT100Ω | |
Heating system | Fully independent system, nickel-chromium alloy electric heating heater | |
Circulatory system | Steam convection hot row | |
Material used | Outer box material | High quality carbon steel plate. Phosphating electrostatic spray treatment / SUS304 stainless steel matte line hairline treatment |
Inner box material | SUS304 stainless steel high quality mirror light panel | |
Insulation material | Polyurethane rigid foam, ultra-fine glass fiber cotton | |
Standard configuration | 1 sample rack, 3 layers of partition | |
safety protection | Overvoltage, short circuit, over temperature, over current protection | |
voltage | AC220V/ 50±0.5Hz single phase | |
Note: 1. The above data are all at ambient temperature (QT) 25 ° C. Under no load conditions in the studio 2. Can be customized according to the specific requirements of users, non-standard high and low temperature, low temperature laboratory |
2. Test chamber material:
2.1 Test box size: PCT-30 (300x L500 mm), round test box
2.2 Overall dimensions: 900x 900 x 1600 mm (W * D * H)
2.3 Inner barrel material: stainless steel plate (SUS # 316 3 mm) or plastic spray
2.4 Outer barrel material: stainless steel plate material
2.5 Insulation material: rock wool and rigid polyurethane foam insulation
2.6 Steam heating chamber heating tube: titanium tube heating, never rust.
2.7 Control system:
a. Use touch controller to control test temperature, time and information query and data export.
b. Use the pointer to display the pressure gauge.
c. Microcomputer P.I.D automatic calculation to control the temperature of saturated steam.
d. Manual water inlet valve (automatic water supply function, continuous test without stopping). Inquiry.
2.8 Mechanical structure:
a. Round inner box, stainless steel round test inner box structure, in line with industrial safety container standards, can prevent dew dripping during the test.
b.The circular web lining and stainless steel circular web lining design can avoid the latent heat of steam directly impacting the test product.
c. Precision design, good air tightness, low water consumption, continuous 400Hrs operation with each water addition.
d. The patented packing design makes the door and the box more closely integrated, which is completely different from the traditional squeeze type, which can extend the packing life.
e.Critical point LIMIT mode automatic safety protection, abnormal cause and fault indicator display.
2.9 Security protection:
a. The imported high temperature resistant sealed solenoid valve adopts a double circuit structure to ensure no pressure leakage.
b. The whole machine is equipped with multiple pressure protection devices such as over-pressure protection, over-temperature protection, one-button pressure relief, and manual pressure relief to ensure the user's use and safety to the greatest extent.
c. Back pressure door lock device, when there is pressure in the test chamber, the test chamber door cannot be opened
3.Main accessories table:
Thermostat: Touch controller
Test temperature record U disk export (standard configuration)
Computer online control (optional)
High temperature and high pressure water level device: Taiwan Hongyu
High temperature solenoid valve: German herion
Relay: Japan Omron
Pressure Gauge: China Red Flag
Over temperature protector: Korea AGO
S. S. R: Taiwan is famous
Temperature and humidity sensor: VAISALA, Netherlands
Heater: self-produced (all titanium tube)
Pressure safety device: self-produced (copper spring type)
High pressure clean water pump: (Germany) PUM
Hose: Nissan Aseptic
Cabinet material (inner barrel): SUS316
Outer box material: SUS304
Sealing ring: Silicone V-shaped mold
4.Other accessories
4.1 test rack 1 set
4.2 Sample tray
5. Power supply system:
5.1 System power fluctuation must not be greater than ± 10
5.2 Power supply: single phase 220V 20A 50 / 60Hz
6.Environment & Facilities:
6.1 Allowable working environment temperature: 5 ℃ ~ 30 ℃
6.2 Experimental water: pure water or distilled water
7.With file:
6.1 System new warranty, warranty
6.2 Operation and Maintenance Manual
Company introduction
BOTO GROUP is a professional manufacturer of various kinds of testing equipment over 20 years. BOTO products are widely used in paper products, packaging, ink printing, adhesive tapes, bags, footwear, leather products, environment, toys, baby products, hardware, electronic products, plastic products, rubber products and other industries, and applicable to all scientific research units, quality inspection institutions and academic fields.
BOTO deals with customers from more than 150 countries and regions.
Meanwhile, we are committed to cooperate with different dealers in
different countries and regions in order to offer better service.
Our mission is to help every customers establish testing labs to
ensure the quality of their products.
Our company will continue to develop, innovate and keep faith. We
combine with the international testing standards and the specific
demands of customers that may establish a new banner in Chinese
testing industry.
The factory has the ability to calibrate, and the customer can also designate a ISO 17025 accredited third-party organization to calibrate and issue a calibration report.
Certification
The certificate is valid until June 17, 2024
Main equipment
Main market
BOTO ADVANTAGE
OUR TEAM
Our Services
During the whole business process, we offer Consultative Selling service.
1) Customer inquiry process:
Discussing testing requirements and technical details, suggested suitable products to customer to confirm. Then quote most suitable price according to customer requirements.
2) Specifications customize process:
Drawing related drawings to confirm with customer for customized requirements. Offer reference photos to show the products appearance. Then, confirm the final solution and confirm final price with customer.
3) Production and delivery process:
We will produce the machines according to confirmed PO requirements. Offering photos to show production process.
After finish production, offer photos to customer to confirm again with the machine. Then do own factory calibration or third party calibration(as customer requirements). Check and test all the details and then arrange packing.
Deliver the products in confirmed shipping time and inform customer.
4) Installation and after sale service:
Defines installing those products in the field and providing after-sales support.