|
[China]
Trade Verify
Address: Room 2304, Fortune Plaza, No. 5616 Caoan Road, Anting Town, Jiading District, Shanghai
Contact name:Sherry Zhang
BOTO GROUP LTD |
|
Verified Suppliers
|
|
|
Walk in environmental tes chamber simulate the effects that a range of temperature and humidity conditions have on a product or material, for example telecommunications equipment or photovoltaic solar panels that are exposed to outdoor temperature and humidity conditions. They have applications in industries as disparate as food science, semiconductors, and military quality assurance. A good temperature humidity chamber is essential for evaluating potential success or failure of a product in the field.
Introduction:
Walk-in rooms are perfect for any product testing that requires a higher volume than standard units.Our walk-in rooms feature fast temperature change rates, high humidity and explosion resistant applications.
Features:
• This series product use polyurethane panel,the inner surface is made of stainless steel,the surface of the shell is made of color steel.It has firm structure and easy installing,with a elegant appearance and novel design.
• We adopt import fittings as our main control fittings to ensure oven quality.
Use the newest cooling conrol model in the international , it can adjusted the cooling power of the compressor reach to 0%-100% automatically to realize low energy consumption run of the machine.
• Configured with Multi-panel sliding doors and inboard type Illumination,, it provides good observation for the specimen's working.
• Size and performance can be customized by customers.
• This system has simple operation and convenient to install,training and Maintenan.
| purpose | Non-standard testing instrument(It is applicatable for the testing of electronics,household appliances, automotive electronics and materials to prosess whole machine or sample test for kinds of climatic factor. | ||||||||||
| model | BT-EK−01Series | BT−EK05− 05Series | BT-EK-10Series | ||||||||
| volume of the workroom(m³) | customized according to customers requirements. | ||||||||||
| Specifications | temperature range | -20°C -40°-60°C~+100°C | |||||||||
| humidity range | 20~98%R.H(+20°C~+80°C) | ||||||||||
| temperature deviation | ≤±2°C | ||||||||||
| humidity deviation | ±2.0%RH(>75%RH),±3±2.0%RH(>75%RH),±3.0%RH(≤75%RH)0%RH(≤75%RH) | ||||||||||
| temperature fluctuation | ≤±0.5°C | ||||||||||
| heating rate | ≥3-5°C/min(better than national standard ) | ||||||||||
| Cooling rate | ≥1-1.5°C/min(better than national standard ) | ||||||||||
| refrigeration compressor | Hermetically sealed compressor "Taikang” imported From French / Semi-hermetic compressor Gulun of German | ||||||||||
| refrigerant | environmental protection HFC-R404A/HFC-R23 | ||||||||||
| cooling mode | Air-Cooling or water cooling | ||||||||||
| Airflow mode | single cycle,stem extension,Stainless Steel centrifuge blade. | ||||||||||
| mode of refrigerant | cell refrigeration/double refrigeration | ||||||||||
| Water supply | built-in water tank | ||||||||||
| dehumidification | freeze | ||||||||||
| control system | Fuji of Japan's /a LCD touch screen of Japan's OYO /LCD touch screen of Korea (TEMI880) | ||||||||||
| Temperature Control | procedure&program | ||||||||||
| Security device | Multiple alarm device such as:electric leakage,water shortage,overheat,over pressure of compresor,overcurrent | ||||||||||
| Standard Configuration | internally heated hollow glass observation window | ||||||||||
| Power Supply | 380V±10%50Hz 3P+N+G | ||||||||||
| Standards Applied | GB2423.1-89 Basic environmental testing procedures for electrician electronic products(Test A Test method of low temperature) GB/T2423.3-93 Basic environmental testing procedures for electrician electronic products (Test method of muggy temperature ) GB/T2423.4-1993 Test Db Test method of alternate muggy temperature | ||||||||||
Walk-in Environmental Test Chamber Demision Table:
| Volume | Inner size(D×W×H) | Workroom Outer(D×W×H) | Complete(D×W×H) | Door(D×W×H) | |||||||
| 8M3 | 2000×2000×2000 | 900×2300×2550 |
(3900~4550)×2300×2550 | 1000×2000* | |||||||
| 10M3 | 2500×2000×2000 | 3400×2300×2550 | (4500~5050)×2300×2550 | 1000×2000* | |||||||
| 12M3 | 2500×2500×2000 | 3400×2800×2550 | (4500~5050)×2800×2550 | 1000×2000* | |||||||
| 14M3 | 3200×2000×2200 | 4100×2300×2750 | (5100~5750)×2300×2750 | 1000×2000* | |||||||
| 16M3 | 3200×2000×2500 | 4100×2300×3050 | (5100~5750)×2300×3050 | 1000×2500* | |||||||
| 20M3 | 3600×2500×2200 | 4500×2800×2750 | (5500~6150)×2800×2750 | 2000×2200 | |||||||
| 22M3 | 3600×2500×2500 | 4500×2800×3050 | (5500~6150)×2800×3050 | 2000×2500 | |||||||
| 25M3 | 4000×2500×2500 | 4900×2800×3050 | (5900~6550)×2800×3050 | 2000×2500 | |||||||
| 26M3 | 4000×3000×2200 | 4900×3300×2750 | (5900~6550)×3300×2750 | 2500×2200 | |||||||
| 32M3 | 5200×2500×2500 | 6100×2800×3050 | (7100~7800)×2800×3050 | 2000×2500 | |||||||
| 34M3 | 5200×3000×2200 | 6100×3300×2550 | (7100~7800)×3300×2550 | 2500×2200 | |||||||
| 38M3 | 3600×3500×3000 | 4650×3800×3550 | (5650~6300)×3800×3550 | 2500×2500 | |||||||
| 44M3 | 4400×4000×2500 | 5450×4300×3050 | (6450~7100)×4300×3050 | 2500×2500 | |||||||
| 46M3 | 4400×3500×3000 | 5450×3800×3550 | (6450~7100)×3800×3550 | 2500×2500 | |||||||
| 48M3 | 4800×4000×2500 | 5850×4300×3050 | (6850~7500)×4300×3050 | 2500×2500 | |||||||
| 84M3 | 7000×4000×3000 | 8100×4300×3550 | 4000×3000 | ||||||||
| 300M3 | 10000×5000×6000 | 11100×5300×6550 | |||||||||
Packing & Delivery
Production Process
Production Details
Factory Inspection
We control quality from the materials, electronic parts, controller,comppressor, solenoid valve, and many parts of the products.
Certification
Cooperative partners
BOTO ADVANTAGE
Customers photos
OUR TEAM
Our Services
During the whole business process, we offer Consultative Selling service.
1) Customer inquiry process:
Discussing testing requirements and technical details, suggested suitable products to customer to confirm. Then quote most suitable price according to customer requirements.
2) Specifications customize process:
Drawing related drawings to confirm with customer for customized requirements. Offer reference photos to show the products appearance. Then, confirm the final solution and confirm final price with customer.
3) Production and delivery process:
We will produce the machines according to confirmed PO requirements. Offering photos to show production process.
After finish production, offer photos to customer to confirm again with the machine. Then do own factory calibration or third party calibration(as customer requirements). Check and test all the details and then arrange packing.
Deliver the products in confirmed shipping time and inform customer.
4) Installation and after sale service:
Defines installing those products in the field and providing after-sales support.
FAQ
1. How can we guarantee quality?
Continuous testing is performed after production is completed to ensure product stability.
All parts come from manufacturers of world-renowned brands.
