BOTO GROUP LTD |
Verified Suppliers
|
|
Professional Programmable Constant Temperature And Humidity Test Chamber
1.Use the high precision microcomputer touch temperature and
humidity controller with high stability of platinum resistance to
temperature and wind speed in the circulatory system of temperature
and humidity test.
2. Control temperature&humidity well-distributed, precisely and
steady.
3.Completely independent system separate for testing in high
temperature, low temperature and constant temperature&humidity
environment.
Specifications
Model | B-TH-280 | B-TH-2150 | B-TH-2225 | B-TH-2408 | B-TH-2800 | |
Inner Size W×H×D(cm) | 40×50×40 | 50×60×50 | 50×75×60 | 60×85×80 | 100×100×80 | |
Outside Size W×H×D(cm) | 93×155×95 | 100×148×106 | 117×166×91 | 140×176×101 | 170×186×111 | |
Volume (V) | 80 L | 150L | 225L | 408L | 800L | |
Temp and Hum Range | A:-20°C~150°C B: -40°C~150°C C: -60°C~150°C D: -70°C~150°C RH20%-98% | |||||
Function | Fluctuation | ±0.5°C ±2.5%RH | ||||
Deviation | ±0.5°C-±2°C ±3%RH(>75%RH); ±5%RH(≤75%RH) | |||||
Controller Analytical Accuracy | ±0.3°C ±2.5%RH | |||||
Wind Cycling Way | Centrifugal fan-broadband type forced air circulation | |||||
Refrigeration Way | Single stage compression refrigeration | |||||
Refrigerator | French Tecumseh | |||||
Refrigerants | R4O4A USA DuPont environmental protection refrigerant(R23+R404) | |||||
Condensing Way | Air-cooled or water-cooled | |||||
Water Supplying Way | Automatic cycling water supply | |||||
Safety device | Non- fuse-switch(compressor overload, refrigerant high low voltage, over-humidity and temperature protection, Protection switch,fuse stoppage warning system |
Accepted Delivery Terms | FOB, CFR, CIF, EXW, DDP |
Accepted Payment Currency | USD, EUR, HKD, CNY |
Accepted Payment Type | T/T, L/C, Credit Card, PayPal, Western Union, Cash, Escrow |
Nearest Port | Shenzhen, Guangzhou, Shanghai, Qingdao, Tianjing or rquired |
4)Production and delivery process:
We will produce the machines according to confirmed PO
requirements. Offering photoes to show production process. After
finish production, offer photoes to customer to confirm again with
the machine. Then do own factory calibration or third party
calibration(as customer requirements). Check and test all the
details and then arrange packing.Deliver the products in confirmed
shipping time and inform customer.
5)Installation and after sale service:
Defines installing those products in the field and providing
after-sales support.