|
[China]
Trade Verify
Address: Room 2304, Fortune Plaza, No. 5616 Caoan Road, Anting Town, Jiading District, Shanghai
Contact name:Sherry Zhang
BOTO GROUP LTD |
|
Verified Suppliers
|
|
|
B-SST-120 Sedimentation Rate1-2ml/80c㎡.H Sea Water Immersion Test Equipment
Salt spray test machine is an accelerated corrosion test that produces a corrosive attack to the coated samples in order to predict its suitability in use as a protective finish. The appearance of corrosion products (oxides) is evaluated after a period of time. Test duration depends on the corrosion resistance of the coating; the more corrosion resistant the coating is, the longer the period in testing without showing signs of corrosion. Different coatings have different behaviour in salt spray test and consequently, test duration will differ from one type of coating to another.
Characteristics:
1. Spray nozzle the heart of teser adopt Bo Nute Principle which
change saline water into atomization but no crystallization
produced.
2. Controller is digital type microcomputer which delivers precision temparature.
3. Parameters show on the display screen such as temparature, humidity, pressure, spray capacity and time.
4. Test specifications are accept worldwild.
Equipment by the occurrence of silent and efficient ozone generator ozone gas, and a certain amount of air processed, the switch in the mixture into the chamber, the continuous line UV detector to detect the concentration of ozone, ozone generator control feedback to the systems to control system settings according to the occurrence of effective control of ozone to the ozone chamber to maintain the appropriate concentration of work by heating humidification systems to meet all the test conditions.
Product Features:
FRP material forming, high temperature, never leak
Special nozzle design, spray evenly
Cycle and continuous spray selection, suitable for a variety of
test standards
FRP structure suitable for neutral salt spray test, acid salt spray
test and high temperature salt spray test
The main products with salt:
Neutral salt spray test
Acid salt spray test
High temperature salt spray test (FRP opaque cover)
Mainly used for hardware, electroplating industry for salt spray
corrosion resistance test
| Model | BT-2001K | BT-2002K | BT-2003K |
| Inside box size(cm) | 60x45x40 | 90x60x50 | 120x80x50 |
| Outside box size(cm) | 107x60x118 | 141x88x128 | 190x110x140 |
| Testing room temperature | Salt test (NSS ACSS)35±1 degree / Corrosion Test (CASS)50±1 degree | ||
| Pressure barrel temperature | Salt test (NSS ACSS)47±1 degree / Corrosion Test (CASS)63±1 degree | ||
| Brine temperature | 35±1 degree or 50±1 degree | ||
| Testing room Capacity | 108L | 270L | 480L |
| Brine tank capacity | 15L | 25L | 40L |
| Salt concentration | The concentration of sodium chloride 5% or the 5% concentration of sodium chloride add 0.26g per liter of copper chloride (CuCl2 2H2O) | ||
| Air pressure | 1.00±0.01kgf/cm2 | ||
| Spray volume | 1.0~2.0ml/80cm2/h (working at least 16 hours, and then take the average) | ||
| Testing room relative humidity | 85% above | ||
| PH | 6.5~7.2 3.0~3.2 | ||
| Spray form | Programmable spray (Including continuous and intermittent spray) | ||
| power | AC220V1Φ10A | AC220V1Φ15A | AC220V1Φ20A |
