Active Member
|
[China]
Address: 1-3,Bldg 7,City Manor,No.6,Taifu Road,Shuangfulu Street,Shuangfengqiao Street,Yubei Dist,Chongqing,China
Contact name:David
Chongqing Lianwai Technology Co., Ltd. |
|
|
LW-J100 0.1-2.0mm Metal Sheet Intelligent Precision Non-deformation
Cold Welding Machine
Introduction:
LW-J100 metal sheet cold welding machine is a new type of cold
welding machine developed for the metal sheet industry for welding
metal plates in 0.12-2.0mm thickness. This machine is small in
size and high in efficiency. It can be quickly used by those who
have no experience in welding machine operation. The solder joints
are silver-white, and there is no need for polishing in the later
stage.
Specification sheet
| Device model | LW-J100 | Product Size(mm) | 220*420*275 |
| Product weight | 20kg | Control method | CPU |
| Input voltage | 220V | Argon delay time(S) | 10 |
| Minimum current | 2A | Welding thickness(mm) | 0.12-2.0 |
| Input power | 1000W | Function selection | 1-4 gear |
| Cooling method | Air-cooling | Welding gun method | Manual/pedal |
| Internal power supply | IGBT | Protection level | IP40 |
Performance characteristics
| Welding temperature---low | The welding temperature is so low that it can be touched by hand. Because the welded plates are not deformed or undercut. |
| Welding thickness---wide | The thickness of the plate can be welded to 0.12-2.0mm. |
| Welding materials---more | Weldable profiles: stainless steel, thin iron, copper, aluminum. |
| Weld seam---smooth and beautiful | The welding seam is smooth and presents silvery white fish scales, no undercut, no deformation, the minimum width of the welding seam is about 1mm, and no heat affected zone. |
| Cost of use---low | The argon used is ordinary argon, and the amount of argon used is one-fifth of the argon arc welding. |
| Labor cost---saving | Anyone with or without welding machine operating experience can get started quickly. The operation is simple and convenient, and no professional welder is required. |
| Welding penetration --- deep | The penetration depth after welding is several times higher than that of laser welding and reaches or exceeds the penetration depth of argon welding. |
| CPU chip control and adjustment---convenient | Using CPU control, German original, welding temperature control is more convenient, for example, 1 mm plate can be welded on one side and formed on two sides, or the front side can be welded on the back side without color penetration. |
Comparison table of cold welding, laser welding and argon arc
welding
| Product comparison, machine name | LW-J100 Thin Plate Cold Welding Machine | Laser welding | Traditional argon arc welding |
| Welding repair temperature | low | Low | High |
| Welding thickness | 0.12-2.00mm | 0.1-0.8mm | The minimum is 0.6mm, and welding is not possible under 0.5mm. |
| Operator technical requirements | You can get started quickly with or without experience. | 1 month study period | Professional welder |
| Features | The output energy is accurate, no undercut, no deformation. | The weldment is more restricted by the welding machine fixture and the operating table | The output energy is large, and the weldment is deformed and discolored seriously |
| Weld scars, welds | The weld seam is smooth, with small scars, no need to be polished, and silvery white. | The welding seam is smooth, the scar is small, and it does not need to be polished, and it is silvery white. | The weld seam is uneven, and the scar needs to be polished, dark brown |
| Argon consumption | One-fifth of the amount of argon used in argon arc welding | Requires pure argon | Large amount of argon |
Product Photos
