Model | WD400 |
MMA/ cellulose mode | OCV | 76VDC |
current range | 30A/21.2V~400A/36V |
rated current (DC) | 400A | 310 |
rated voltage (DC) | 36V | 32.4 |
duty-cycle | 60% | 100% |
electroder type | E7018 / E6018/E4315/E4316 include cellulose electroder (foxcel 6010
) etc. |
electroder size | Φ2.0- 6.0 mm electroder continous |
Arc gouging with up to 1/4″(6mm) carbon |
TIG mode | OCV | 76VDC |
current range | 30A/11.2V--400A/30V |
rate current (DC) | 400A | 310A |
rate voltage(DC) | 26V | 22.4V |
duty cycle | 60% | 100% |
arc start mode | SCRATCH |
MIG/FCAW mode | OCV | 76VDC |
voltage range | 15V --40V |
rated current (DC) | 400A | 310 |
rated voltage(DC) | 34V | 29.5 |
duty cycle | 60% | 100% |
wire size(flux-cored) | flux-cored wire Φ1.6/2.0 continous |
wire feeder type | LN-25 OR miller 12vs OR WF120 (SENCI) |
Auxiliary power | Frequency | 50Hz |
Phase | 3 phase | single phase |
Output voltage/power | 400V AC/16kW | 230V AC/6.9kW |
power factor | 0.8 | 1 |
Output current | 28.8A | 15A*2 |
Engine | Model | V1305 | 4D24G | WP2.3D25 |
make | KUBOTA | YUCHAI | WEICHAI |
Cylinders | 4 cylinders |
type of Cooling | water- cooled |
CC(L) | 1.335 | 2.45 | 2.3 |
fuel | diesel |
Output power | prime 19.0kW /standby21.0kW | prime 23.0kW /standby25.2kW |
engine Speed | 3000rpm | 1500rpm |
Battery Capacity | 80 Ah/12V |
Starting & Stop Method | electric start and shut off . Engine start by ignition key ,
emergence stop |
Warning Type | high temperature, low oil pressure, , low fuel level, battary
charging failure |
Fuel Consumption | 400A OR 16KW AC output | 5.0L/hr |
300A | 3.9L/hr |
200A | 2.9L/hr |
100A | 2.0L/hr |
NO LOAD | 1.5L/hr |
Whole set | Fuel Tank Capacity | 65L |
transport | lift eye and track slots |
Protection class | IP23 |
insulation class | F |
Weight | 520kg | 640kg |
Dimension | 1480(L)*800(W)*1050(H) |