Home Companies ANHUI TIGER CO,.LTD

Horizontal Type ETD29 Electrical Power Transformer / High Frequency Power Transformer

Active Member

Contact Us

[China]

Address: E13,Star Park Enterprises Zone,No.198,Ming Zhu Road, Hefei ,Anhui ,China

Contact name:Sherry Fu

ANHUI TIGER CO,.LTD

Horizontal Type ETD29 Electrical Power Transformer / High Frequency Power Transformer

Country/Region	china
City & Province	hefei anhui

Product Details

Horizontal Type ETD29 With Inductance of 282uH High Frequency Transformer

Features:

• Core mounted Horizontal or Vertical

• Hipot voltage:2500Vrms

• Ferrite core material

• High-temperature resistant

• High efficiency of over 95%

• Working frequency range 20kHZ-500kHZ

• High isolation strength

• Lower profile and weight

• high power density

• Operating temperature -40℃to+125℃

• Custom designs available

• Rate current @40℃ TYP temperature rise

• Ideally used as common mode noise filter for TV,VCR,

Switching power supply,NC machine,PC&PC related

advice,measurement and control unit

Specifaction :

Winding Instruction

Primary Winding

Start on pin(s) 3 and wind 18 turns (x 2 filar) of item [5]. in 1 layer(s) from left to right. Winding direction is clockwise. On the final layer, spread the winding evenly across entire bobbin. Finish this winding on pin(s) 2.

Add 1 layer of tape, item [3], for insulation.

Bias Winding

Start on pin(s) 5 and wind 5 turns (x 2 filar) of item [5]. Winding direction is clockwise. Spread the winding evenly across entire bobbin. Finish this winding on pin(s) 4.

Add 3 layers of tape, item [3], for insulation.

Secondary Winding

Use 3 mm margin (item [7]) on the left side and 3 mm margin on the right side (to meet safety). Start on pin(s) 9 and wind 6 turns of item [6]. Winding direction is clockwise. Finish this winding on pin(s) 8.

Add 3 layers of tape, item [3], for insulation.

Primary Shield 1 Winding

Leaving the start of this winding unconnected, wind 1 turn of item [8]. Winding direction is clockwise. Finish this winding on pin(s) 1.

Add 1 layer of tape, item [3], to secure the winding in place.

Primary Winding (Section 2)

Start on pin(s) 2 and wind 18 turns (x 2 filar) of item [5]. in 1 layer(s) from left to right. Winding direction is clockwise. On the final layer, spread the winding evenly across entire bobbin. Finish this winding on pin(s) 1.

Add 3 layers of tape, item [3], for insulation.

Core Assembly

Assemble and secure core halves. Item [1].

Varnish

Dip varnish uniformly in item [4]. Do not vacuum impregnate.

Materials:

[1] Core: ETD29/16/10, 3F3, gapped for ALG of 196 nH/T²

[2] Bobbin: Generic, 7 pri. + 7 sec.

[3] Barrier Tape: Polyester film [1 mil (25 μm) base thickness], 19.40 mm wide

[4] Varnish

[5] Magnet Wire: 0.45 mm, Solderable Double Coated

[6] Copper Foil: 125 μm thick, 13.40 mm wide, covered with 1 layer of lapped tape. Terminations to foil: 2 x 0.6 mm magnet wire with sleeving

[7] Tape: Polyester web 3 mm wide

[8] Copper Foil: 50 μm thick, 19.40 mm wide, covered with 1 layer of lapped tape. Terminations to foil: 1 x 0.45 mm magnet wire

FAQ

1. Q: Can I get some samples?
A: Yes, sample order is available for quality check and market test.
2. Q: What's the delivery time?
A: Sample order needs 7 days. Formal order needs 15-25 days.
3. Q: What's your payment terms?
A: We usually accept T/T at sight as the main payment terms, and other payment can also be negotiated.
4. Q: Do you have the prodcts in stock?
A: Yes,we will keep some general ones in stock.
5. Q: Can I mix different models in one container?
A: Yes,different models can be mixed up.

6. Q: Do you customize for customer or accept OEM Orders ?
A: Yes,we provide designing and customizing services. OEM orders are also accepted

Application:

TIGER is a leading designer and manufacturer of magnetic components. We offer an extensive products line, composed of standard and custom transformers, inductors and related components to meet all of your magnetic needs. Our in-house engineering team is ready to provide you with local technical support, as well as design custom products based on your specifications. We are able to support both low volume, quick turnaround production, as high volume, low cost production.

With facilities in China, TIGER can provide sales and manufacturing support on a global level.Customers can take advantage of our overseas production and shipping capabilities for greater flexibility and convenience.

Contact Us

ANHUI TIGER CO,.LTD

Horizontal Type ETD29 Electrical Power Transformer / High Frequency Power Transformer

Product Details

Hot Products

Horizontal Type ETD29 Electrical Power Transformer / High Frequency Power Transformer

Customized High Frequency Transformer EE35 Ferrite Transformer For Switched Mode Power Supply

ISO Certificated PQ2620 Series High Frequency Transformer Switching Power Supply Transformer

High Frequency Ferrite Core Transformer Customized 2500Vrms Hipot Voltage

RM6 8.2mH High Frequency Transformer 6 Pins Ferrite Core Material For Switching Power Supply

Vertical Type High Frequency Transformer Low Transmission Power Magnetic Transformer