Active Member
|
[China]
Address: #1008.Junjiang Internatioanl Bldg. 228 Ningguo Rd. Yangpu Dist. Shanghai. 200090. China
Contact name:
Shanghai Korain Biotech Co., Ltd |
|
|
Human Protein Cereblon Sandwixh ELISA Kit CRBN ELISA Test Kit With
2 Hours Assay Time
Reagent Preparation
All reagents should be brought to room temperature before use.
Standard Reconstitute the 120μl of the standard (4800ng/L) with 120μl of
standard diluent to generate a 2400ng/L standard stock solution.
Allow the standard to sit for 15 mins with gentle agitation prior
to making dilutions. Prepare duplicate standard points by serially
diluting the standard stock solution (2400ng/L) 1:2 with standard
diluent to produce 1200ng/L, 600ng/L, 300ng/L and 150ng/L
solutions. Standard diluent serves as the zero standard(0 ng/L).
Any remaining solution should be frozen at -20°C and used within
one month. Dilution of standard solutions suggested are as follows:
| 2400ng/L | Standard No.5 | 120μl Original Standard + 120μl Standard Diluent |
| 1200ng/L | Standard No.4 | 120μl Standard No.5 + 120μl Standard Diluent |
| 600ng/L | Standard No.3 | 120μl Standard No.4 + 120μl Standard Diluent |
| 300ng/L | Standard No.2 | 120μl Standard No.3 + 120μl Standard Diluent |
| 150ng/L | Standard No.1 | 120μl Standard No.2 + 120μl Standard Diluent |
| Standard Concentration | Standard No.5 | Standard No.4 | Standard No.3 | Standard No.2 | Standard No.1 |
| 4800ng/L | 2400ng/L | 1200ng/L | 600ng/L | 300ng/L | 150ng/L |
Wash Buffer Dilute 20ml of Wash Buffer Concentrate 25x into deionized or
distilled water to yield 500 ml of 1x Wash Buffer. If crystals have
formed in the concentrate, mix gently until the crystals have
completely dissolved.
Assay Principle
This elisa test kit is an Enzyme-Linked Immunosorbent Assay
(ELISA). The plate has been pre-coated with human CRBN antibody.
CRBN present in the sample is added and binds to antibodies coated
on the wells. And then biotinylated human CRBN Antibody is added
and binds to CRBN in the sample. Then Streptavidin-HRP is added and
binds to the Biotinylated CRBN antibody. After incubation unbound
Streptavidin-HRP is washed away during a washing step. Substrate
solution is then added and color develops in proportion to the
amount of human CRBN. The reaction is terminated by addition of
acidic stop solution and absorbance is measured at 450 nm.
Intended Use
This sandwich kit is for the accurate quantitative detection of
human Protein Cereblon (also known as CRBN) in serum, plasma, cell
culture supernates, cell lysates, tissue homogenates.
Precautions
Specimen Collection
Serum Allow serum to clot for 10-20 minutes at room temperature.
Centrifuge at 2000-3000 RPM for 20 minutes.
Plasma Collect plasma using EDTA or heparin as an anticoagulant.
Centrifuge samples for 15 minutes at 2000-3000 RPM at 2 - 8°C
within 30 minutes of collection.
Urine Collect by sterile tube. Centrifuge at 2000-3000 RPM for
approximately 20 minutes. When collecting pleuroperitoneal fluid
and cerebrospinal fluid, please follow the procedures
above-mentioned.
Cell Culture Supernatant Collect by sterile tubes when examining secrete components.
Centrifuge at 2000-3000 RPM for approximately 20 minutes. Collect
the supernatants carefully. When examining the components within
the cell, use PBS (pH 7.2-7.4) to dilute cell suspension to the
cell concentration of approximately 1 million/ml. Damage cells
through repeated freeze-thaw cycles to let out the inside
components. Centrifuge at 2000-3000 RPM for approximately 20
minutes.
Tissue and other body fluids Rinse tissues in PBS (pH 7.4) to remove excess blood thoroughly
and weigh before homogenization. Mince tissues and homogenize them
in PBS (pH7.4) with a glass homogenizer on ice. Thaw at 2-8°C or
freeze at -20°C. Centrifuge at 2000-3000 RPM for approximately 20
minutes.
*Sample can't be diluted with this kit. Owing to the the material we use to prepare the kit,
the sample matrix interference may falsely depress the specificity
and accuracy of the assay.
Cat.No E2888Hu
Standard Curve Range: 20ng/L - 4500ng/L
Sensitivity: 9.29ng/L
Size: 96 wells
Storage: Store the reagents at 2-8°C. For over 6-month storage refer to
the expiration date keep it at -20°C. Avoid repeated thaw cycles.
If individual reagents are opened it is recommended that the kit be
used within 1 month.
*This product is for research use only, not for use in diagnosis
procedures. It’s highly recommend to read this instruction entirely
before use.
Summary
1. Prepare all reagents, samples and standards.
2. Add sample and ELISA reagent into each well. Incubate for 1 hour
at 37°C.
3. Wash the plate 5 times.
4. Add substrate solution A and B. Incubate for 10 minutes at 37°C.
5. Add stop solution and color develops.
6. Read the OD value within 10 minutes.
