Abrasion Resistance Slurry Pump Parts For Tailing Handling / Coal Wing / Mining

Mining slurry pump spare parts of high chrome cast iron wear resistant for tailing handling,coal wing, mining

Mining Centrifugal electric Slurry pump parts

Completely interchangeable with slurry pumps and  gravel pumps

For unlisted slurry pump parts, OEM service offered---Drawings needed.

- Impeller

- Metal Liner

- Rubber Liner

- Bearing Assembly

- Base

- Pump Volute;

- Cover Plate & Frame Plate

- Others

Whether solids transport in the front-end, in-plant processing or tailings, we can produce the best parts for your application.

1. Slurry pump spare parts are mainly made of high-chromium alloy, hard nickel alloy, hastelloy alloy or elastic material, depending on the demand for chromium content in practical application.
2. Most of our slurry pump rubber parts contain natural rubber and synthetic rubber .The natural rubber type shows
some excellent properties ,such as good resistance to acid and corrosive slurry ,good abrasion resistance to small particles, etc. On the other hand, the synthetic rubber type possesses outstanding resistance to abrasion, corrosion as well as high temperature.
3.The slurry pump spare parts we supplied are suitable for standard slurry pump including vertical sump pump ,gravel pump and related 4 mining pumps ,and these products are all qualified .In addition ,we have built up our own factory for casting ,machining, testing and other procedures .
4. OEM drawing of slurry pump is acceptable, and we will provide our client with samples first for the quality inspection .

Slurry pump parts-----impeller:

The pump impeller is made of rubber or metal, and the metal liner and rubber liner are interchangeable .The back vane can reduce the sealing pressure ,and it can also cut down backflow to the largest extent at the same time .On the other hand ,cast-in impeller threads are more suitable for slurry .

Slurry pump parts-shaft sleeve

With ceramic coating----high hardness and fracture
toughness and wear resistant
Shaft sleeve manage wear to minimize shaft cost.
Wherever there is a bearing support for the shaft, centrifugally cast shaft sleeves are used to prevent wear to the shaft. Refurbishment of the shaft is simply a matter of replacing the sleeve and reusing the shaft.

Slurry pump parts- cover plate& frame plate

Slurry pump cover plate & frame plate for heavy duty centrifugal slurry pump in axial direction is used to bear pressure, and the liner is wear-resistant.

Slurry pumps parts-cover plate liner & frame plate liner

The cover plate is produced using elastomer or hard metal,
such as natural rubber, high - chromium alloy, etc.
It has various sizes and styles, and the installation is very easy. Additionally, OEM design is accepted. This product is also named as slurry pump liner, and it is also an overflow component. It can form a pump chamber with throat bush and frame plate liner insert. Meanwhile, it is white iron with high-chromium alloy whose content as much as 27%, and it shows good resistance to abrasion .

Slurry pump parts--packing (pump seal)

The sealing method contains packing seal, centrifugal seal and mechanical seal. The packing is usually used for packing seal and centrifugal seal, and our product has different models .Clients are recommended to buy two boxes of packing at one time which are sufficient for one pump

Slurry pump spare pats-Volute liner

This is volute liner for slurry pump with excellent wear resistance, corrosion resistance and large passage area.
Good casing design makes maintenance easily and cost much lower. Advanced heat treat technology is used to treat high chrome alloy and results with a compact micro-structure and a high quality product.

Slurry pump parts-bearing assembly

Bearing assembly uses cylindrical structure, adjusting the space between impeller & front liner easily, being removed completely when being repaired.

Slurry pump OEM parts

They are made of iron, steel, rubber or high-chromium alloy. After the OEM parts are supplied by us depending on the machining drawing, andomponents are produced, we will provide customer with sample for quality detection.

2. Materials

High chrome alloy: A05, A07, A33, A49, etc.

Natural rubber: R08, R26, R33, , etc.

Other material as per requests, like stainless steel, duplex stainless steel, Nickle alloy, Alloy 20, etc.

3. Short delivery time

For some slurry pump parts, stocks are available. We have large producing capacity to shorten the delivery time.

4. OEM slurry pump part codes

Here we list some OEM part codes for reference:

Impeller: 127, 147, 145, etc., such as C2127, D3147, E4147, F6147, G8147, G10147, FAM1247...

Volute liner, C2110, D3110, E4110, F6110, G10110, G12110, ...

5. Frame & Bearing Assembly types

Types: B, C, D, E, F, R, X, ST, T, TU, CC, DD, EE, FF, etc.

6. Notice for inquiry

Please send us complete slurry pump part name, part code and material name.

We arrange express delivery for you for urgent needs, such as DHL, Fedex, TNT.

Slurry Pump Part Material