SQ50E 300C Compact Electric Pipe Threading Machine for Steel Pipe 1/4"-2"

Hongli SQ50E 300C Compact Electric Pipe Threading Machine for Steel Pipe 1/4"-2"

Description

The SQ50E threader is an electric motor-driven machine which centers and chucks pipe, conduit and rod (bolt stock) and rotates it while threading, cutting and reaming operations are performed.

Threading dies are mounted in self-opening die heads.

An automatic oiling system is provided to flood the work with thread cutting oil during threading operations.

Features

1. Light weight, portable design.

2. Self-Contained Oil System with adjust-able flow control.

3. Approved by CE standards.

Specifications

• Motor: 1500W universal, 50/60Hz
• Switch: ON/OFF heavy duty switch, foot switch and FOR/OFF/REV switch are optional
• Spindle Speed: 38 RPM.
• Front Chuck: Hammer type with replaceable rocker action jaw inserts.
• Rear Centering Device: Cam action.
• Oiling System: Through die head, with integral oil reservoir.
• Pump: Self-priming constant flow, gerotor pump.

Standard Equipment

• Model SQ50E Threading Machine.
• Self-open die head.
• ½”-¾” universal HSS dies set.
• 1”-2” universal HSS dies set.
• Cutter: Capacity: 1/8”-2”(3 mm-50 mm) pipe
• Reamer: Positive-locking, 5-flute cone, right hand 1/8”-2”(3 mm-50 mm).

Maintenance Instructions

Make sure machine is unplugged from power source before performing maintenance or making any adjustment.

Jaw Inserts

1. Clean teeth of jaw inserts daily with wire brush.

2. Replace jaw inserts when teeth become worn and fail to hold pipe or rod.

NOTE! Replace entire set of jaw inserts to insure proper gripping of the pipe or rod.

Lubrication

Proper lubrication is essential to trouble-free operation and long life of Threader. Grease main shaft bearings every 2 to 6 months depending upon amount of Threader use. Grease fittings are provided on side base, one at each end of shaft. Use a good grade of cup grease.

Machine Storage

Motor-driven equipment must be kept indoors or well covered in rainy weather. Store the machine in a locked area that is out of reach of children and people unfamiliar with threaders. This machine can cause serious injury in the hands of untrained users.

Machine Transportation

1. If machine is on a Stand, a forklift can be used with or without a sling.

2. Once packed, always use a forklift to move the crate.

Ordering Information

Accessories

Standard Spares for SQ50E Compact Pipe Threading Machine