Active Member
|
[China]
Address: Building B-3, Liando U Valley, No. 780 Baoyuan Road, Chengyang High-tech District, Qingdao, China
Contact name:
Qingdao AIP Intelligent Instrument Co., Ltd |
|
|
2. Technical specification
Test object | Rotor of pump motor |
Display mode | 19” LCD |
Test parameter | The quantity of bars, minimum amplitude, maximum amplitude, comprehensive value |
Dimension range | Outer diameter 60-130mm Inner diameter 10-50mm Lamination thickness 180mm(max) |
Test mode | Continuous mode: when test is over, the machine output the result, and the motor continue to work to acquire inductance waveforms until press the reset button, then stop the test. Single mode: when test is over, the machine output the result and stop the test automatically at the same time. |
Control mode | Auto/manual |
Parameter save | Software save |
Consumption | ≤100w |
Working ambient | Temperature 0~40℃, humility≤90%RH |
1. Main performance:
(1) The test data are displayed digitally and can be sent to the computer for sampling, drawing and printing;
(2) Using high-precision load sensor; good stability, long service life, etc.;
(3) The whole machine has high sensitivity, load torque stability and test repeatability;
(4) Only adjusting the excitation current can control the size of the load
(5) The software operation is simple and easy to learn, and it can realize the test methods such as type experiment (manual, automatic), production line (fixed point, durable, fast experiment).
(6) The power tester has multiple ranges (automatic switching) to meet the test of high-power motors and low-power motors
(7) The three-dimensional adjustment table can easily install the motor and realize quick clamping. (for selection)
2. System function:
(1) The switch operation of the motor can be controlled on the computer;
(2) The system has manual and automatic test methods (this method can be operated without a computer). The entire process can be realized on the display controller on the control cabinet; the data can be locked for manual recording;
(3) The system has an automatic test method: the load is automatically loaded according to the setting, and the characteristic curve of the motor from no load to locked rotor (or set value) is scanned;
(4) The system has a fixed-point test method: after the motor runs, the load is automatically adjusted to the set value, and it runs stably at the set value;
(5) Test result: The motor test data is displayed in the form of report or curve, which can be printed and saved, which is convenient for opening and querying the curve next time. The curve coordinate parameters (abscissa and ordinate) can be modified
(6) Rated torque test accuracy: ±0.5%; speed accuracy ±0.2%;
(7) Dynamometer range: 0.05Nm-50000Nm (customers can choose a dynamometer with a suitable range according to their motor power)
