Active Member
|
[China]
Address: Building B-3, Liando U Valley, No. 780 Baoyuan Road, Chengyang High-tech District, Qingdao, China
Contact name:
Qingdao AIP Intelligent Instrument Co., Ltd |
|
|
Servo Motor Stator Testing Machine / Multifunctional Stator Tester
1. Technical specification
| Insulation resistance | |
| output voltage setting range/precision | DC 500V/1000V ±(1.5%×setting value+10V) |
| insulation resistance testing range/precision | 1～500MΩ |
| insulation resistance alarm setting range | Max: 0～500MΩ; Min: 1～500MΩ |
| test time range/resolution | 0.5～999.9s 0.1s/step |
DC winding resistance | |
| measuring range and precision | 10.0mΩ～20KΩ ±(0.3%×display value+3 words) temperature compensation can be set |
| test time range/resolution | 0.5～999s 0.1s/step |
| temperature compensation | Yes |
| temperature probe/measuring range | DS18b20 -10.0℃~+50.0℃ |
| precision | ±0.5°C(range: -10℃~+50℃) |
| Temperature compensation | Yes |
Surge | |
| output voltage setting range/precision | 500～3000V ±(3%×display value+8V) |
| sampling frequency | 100MHz |
| waveform comparison | area, area difference, corona, phase |
Hipot | |
| output voltage setting range/precision | AC 200～3000V ±(2%×setting value+10V) |
| breakdown current measuring range/precision | 0.10～20.00mA ±(2%×setting value+0.05mA) |
| breakdown current presetting alarm range | Max: 0.10～20.00mA; Min: 0.00～20.00mA |
| test time range/resolution | 0.5～999.9s 0.1s/step |
Inductance | |
| electrical level | 0.3V.6V1V |
| test range | 1µH～2H |
| accuracy | 0.5% |
| test frequency | 100Hz 120Hz 1kHz 10kHz |
2. DUT introduction
2.1 Test object: servo motor stator
2.2 Test items: insulation resistance, winding resistance, surge,
Hipot and inductance
3. Product features
3.1 Available selected motor model ≥1000.
3.2 The operator can select test items as required.
3.3 The parameters range for each type of motor can be entered and
saved. The resistance test has the function of setting and
displaying the unbalanced degree.
3.4 Continue to test or stop the test can be selected if the stator
fails the test.
3.5 Statistic data: record the testing data and save the testing
system.
4. Test Process
4.1 Select the program before starting to test. (It is only
necessary when testing a new type of stator for the first time.)
4.2 Put the stator on the designated station and connect the wire
4.3 Slide the cover to start the test, and in-test status will be
displayed.
4.4 The stator is tested automatically, and the operator is not
allowed to touch the stator during the test.
4.5 After testing the stator, OK or NG signal will be shown.
4.6 Continue to test next stator as the above steps.
