Active Member
|
[China]
Address: Room 905, Building A of One World Business Center, Cangzhou, Hebei, China.
Contact name:Lemon
SHEAN (CANGZHOU) CORP LTD |
|
|
Carbon Steel Metal Cutting Horizontal Electric Band Saw Machine
Operation regulation of sawing machine
1. The operators are the employees who have received professional
training in sawing machine operation. Chinese style
2. Employees who have not been trained or carefully read this
specification are not allowed to operate the sawing machine. Those
who violate this specification will be responsible for the
consequences.
Carbon Steel Metal Cutting Horizontal Electric Band Saw Machine
3. Check before startup
(1) Confirm whether the power cord is in good condition. A kind of
(2) Make sure that the starting of the sawing machine will not
affect the surrounding safety.
(3) safe operation
(4) Turn on the cooling water power supply and confirm whether
there is cutting fluid. If not, add it.
(5) adjust the speed control handle of the sawing machine to the rising position, turn on the power supply of the saw bow, and the saw bow starts to rise. After it stops, clamp the saw material on the table, then adjust the speed control handle to the falling position, and the saw bow will fall. Pay attention to the control of the falling speed. When the saw blade is lowered to the position close to the saw material, adjust the handle to the saw bow stop, turn on the power supply of the saw bow, move the saw bow, and adjust the handle to the appropriate falling position Position, turn on the cutting fluid, start sawing, pay attention to the lowering speed of the saw bow during sawing, if it is fast, slow down.
(6) board or board shall be used for the surface of the saw to
prevent from being pinched, and the saw shall be placed flat to
prevent the cut from being vertical. A kind of
(7) The operator is strictly prohibited to place his hand, head or
any part of his body under the saw bow; any part of his body is
strictly prohibited to be within 20cm from the saw bow. A kind of
(8) The operator shall know the saw size in detail before sawing,
and measure whether the cutting size is accurate before cutting the
clamped material.
Carbon Steel Metal Cutting Horizontal Electric Band Saw Machine
| Type | GZ 4230 |
| Cut capcity W*H (mm) | round 300 |
| square 300*300 | |
| Bundle cutting W*H (mm) | Max.200*90 |
| Min.100*20 | |
| Saw belt size(mm) | 3620*27*0.9 |
| belt line speed(m/min) | 40/60/80 |
| Main generator power(kw) | 3 |
| Hydraulic generator power(kw) | 0.75 |
| Cooling generator power (kw) | 0.04 |
| Working clamp style | Hydraulic |
| Saw belt tighten style | Hand |
| Main transmit structure | Turbine |
| Loading style | Extra roller |
| Packing dimensions(mm) L*M*H | 1750*2200*1450 |
| Weights of machine (kgs) | 1600kgs |
