|
[China]
Trade Verify
Address: Hebei Province , Cangzhou City, Yunhe district, Yihe guoji Building 507
Contact name:Darcy Dong
Cangzhou Junxi Group Co., Ltd. |
|
Verified Suppliers
|
|
|
tee joint pipe tube pipe fittings Stainless Steel Equal Tee Seamless Pipe Fittings
Product Description
The three links are pipe fittings and pipe connectors. It is also called three-way pipe fittings or three-way pipe fittings, and three-way joints are used in the branch pipes of the main pipeline.
Tee is a kind of chemical pipe fittings with three ports, namely one inlet and two outlets; or two inlets and one outlet. There are T-shaped and Y-shaped, with equal diameter nozzles and reducing nozzles, used for Where three identical or different pipelines meet. The main function of the tee is to change the direction of the fluid.
Product Name | Stainless Steel Equal Stright Tee ASME Seamless Pipe Fittings |
Material | A234WPB, A420WPL6 St37,St45, E24, A42CP, 16Mn, Q345, P245GH,
P235GH, P265GH, P280GH,P295GH,P355GH WPHY42, WPHY52, WPHY60, WPHY65,WPHY70, WPHY80 P11,P22,P5, P9,P91, 10CrMo9-10, 16Mo3 |
Wall thickness | sch20,sch30,sch40,STD,sch60,XS,sch80,sch120,XXS,etc |
Standard | ANSI B16.9, ASME, JIS, DIN, EU, BS |
Types | 45D, 90D, 180D elbow, equal tee, reducing tee, concentric reducer,
eccentric reducer, cap, cross, socket weld fittings |
Surface treatment | black painting, anti-rust oil |
Package | pallets, wooden cases, containers |
Used | Petrochemical industy;avation and aerospace industry;pharmaceutical
industry;gas exhaust;power plart;ship buliding;water
treament,etc. |
Appearance test
The three links shall not have cracks, over - burning, overheating and other phenomena exist, the surface should be no hard point.
The inside and outside surface of the tee should be smooth, without destructive strength and appearance defects, such as scar, scratch, heavy skin, etc., after the discovery of defects should be polished, the thinness of the polished place is not less than the standard requirements of the wall thickness, polished place should be smooth and use coloring agent or magnetic powder flaw detection to confirm the removal of defects.
(3) the root of the three-way branch pipe is not allowed to have obvious folds.
(4) any defects on the tee pipe body shall not be allowed to be repaired by welding.
