Automatic High Production Wire Drawing Machine for Copper Wire 1800m per minute

1. General description:

This machine is used to draw Φ0.2-Φ0.8mm copper wires.

2. Technical parameter:

3. Brier introduction:

3.1 Payoff stand:

Type: Over head
Dimension of Payoff (mm): 300*300*650mm

3.2 Main drawing machine:

Type: slip type 22-die copper wire drawing machine
Body structure: Body welded from Q235 plate molding, via annealed to remove internal stress, then by precision milling machine.
Inlet wire position on the left side of machine body panel, with 6 inlet wire holes. Outside installation sump.
Shaft material by 40CrMo steel, quenched HRC25-27, to ensure removal of internal stress, and improve the rigidity of the workpiece, with the Department by grinding to ensure concentricity and roundness balance.
The machine drives transmission by flat belts.
Using spray ceramic Capstan, double slot 4 layers 4 units and final Capstan single layer one unit.
First eye mold as an independent mold,the 2nd to the 20th eyes mode are pig iron casting, the body is small, increasing the lead to take working space.
Capstan and lubrication of wire drawing dies, at the top install movable pipe joints, does not affect the threading operation.
The drawing emulsion trough is provided with doors made of stainless steel, which prevent lubricant from overflowing.

3.3 Annealing device

Type: vertical DC annealing, speed tracking automatically
Diameter of annealing inlet wire: Φ0.2 mm-Φ0.8mm
Max linear speed of annealing: 25m/s

3.4 Φ5300 spool take-up:

Spool size: PND300
Max. take up speed: 30m/s
Take-up motor: 5.5KW (AC)
 

4. FAQ:

Dear customers, there are several models for the coppr rod breakdown machine. In order to recommend the suitabe models, we'd like to learn some information:

1. Inlet and outlet wire diameter

2. Whether need online annealer

3. Take up method: Spool bobbin or coiler?

4. Dimension drawing of spool bobbin/wire basket

Best regards

5. Reference photos