Factory 1250 Laying Up Type Cable Making Machine Of 1250-1+1+3 Cable Manufacturing Cradle Type Laying Up Cabling Machine

1. General description:

This machine is specially designed for twisting three-core, four-core and five-core insulated power cables with a core cross-section of 25-300mm2 below 350KV. The twisted core cross-section can be Round, can also be fan-shaped, electric in-line stop pre-torque, end-shaft clamping or loosening spool.

2. Technical parameter:

3.Main electrical components

4. Detailed description:

4.1 Φ1600/1+1+3 Main stranding body:

The first section of Φ1600 wire spool frame is connected to the second section of wire spool frame through the coupling, and the back-twisting, non-return-twisting and pre-twisting operation of the wire reel frame can be realized by disassembling or inserting the pin shaft.
The second section of Φ1600 wire spool is equipped with a twisting bow to pass the core wire released from the first wire spool. The wire spool frame and the bow frame are connected with the main shaft of the main reducer by flanges. The same as the first paragraph, the spool frame is also used to disassemble or install the pin shaft to realize the back-twist, non-back-twist and pre-twist operation of the spool frame.
The third section of Φ1600 three-disk winch cage is connected with the main transmission gear box main shaft through the coupling. Gears are installed at the rear of the winch of the winch cage, and the differential transmission mode is adopted to meet the needs of back-torque or non-back-torque.

4.2 Tapping device:

Tape head type: common type
Number of tape spool: 2 spools
Spool size: Φ400 mm
Tape width: 15-60 mm
Rotation speed of tapping head: 170-380r/min
Tapping pitch: 12-200mm
Tape material Non-metallic tapes such as non-woven fabrics, polyester tapes, etc.
The tapping head has a 6-level speed change, and has the functions of left and right rotation and neutral.
The strap tension is controlled by mechanical friction, and could be adjusted.

4.3 Φ800 Steel strap armoring device:

Armored cable core maximum outer diameter: Φ120mm
Armored head type: Half cut
Number of tape spool: 2 spools
Reel size: Φ800 mm
Tape width: 15-60 mm
Armored head speed: 149-343r/min
Armor pitch: 14-230mm
Armor material: Steel tape
The armored head has 6-speed speed change, and has left and right rotation and neutral function.
Steel strap tension mechanical friction control, and could be adjusted.

4.3 Meter counter:

The circumference of the meter wheel is 500 mm
Maximum meter length 9999.9 m
Accuracy error ≤3‰
It adopts double wheel structure and is installed horizontally; there is a buffer spring at the pressing wheel, and there are wire rollers at the inlet and outlet.

4.4 Φ2000 Wheeled single tracking device:

Traction type: Wheeled single traction, collar ring push wire
Traction wheel diameter: Φ2500 mm
Traction line speed: 4.7-34.2m/min
Traction gear speed: 27 steps

4.5 Φ2500 Take up machine:

Take-up reel specification: PN1600-PN3150
Maximum load: 15T
Maximum take-up speed: 40m/min
Take-up motor: 10kg.m
Cable maximum diameter: Φ120mm
The wire take-up adopts torque motor, which is reliable in operation and simple and convenient in operation and maintenance.
The structure is end shaft type electric clamping or loosening spool, electric lifting spool.
Adopting lead screw cable, the cable can track the take-up speed, and the cable pitch can be adjusted steplessly.

4.6 Mechanical transmission system:

Main drive motor power: 45KW (AC)
The mechanical transmission system includes the main motor, the main reducer, the transmission shaft, the coupling, etc.

4.7 Electrical and electronic control system:

The power supply of this machine is three-phase five-wire system, 380V (±10%), 50HZ.
The main machine of the machine adopts AC motor and frequency conversion control; the take-up adopts torque motor, which can start and stop smoothly, and the operation and maintenance are simple and convenient; the whole machine is controlled by Siemens programmable controller.

4.8 Air source requirements:

Air pressure: 0.6Mpa
Air volume: 1.0m3/min
The compressed air should be dry, free of impurities and dust.

FAQ:

Dear customers, there are several models for the stranding machine. In order to recommend the suitabe model, we'd like to learn some information:

1. Bare wire diameter

2. Soft wire or hard wire

3. Quantity of wires to be twisted

4. Area after twisting.

Best regards

5. Reference photos