Foshan Gaoming Hecheng Yirilom Household Factory |
Verified Suppliers
|
|
Sofa Upholstery Springs Zig Zag Furniture Snake Spring Serpentine
Bundles Zig Zag Springs Serpentine
Zig-zag springs (also named Sinuous springs) are generally used in upholstery, bedding, and car-seating
manufacturing. Our Company has been producing zig-zag springs since 1955 and we are one of European
leaders thanks to our quality and price competitivity.
We export and sell all over the world directly or through our local distributors.
Wire diameter range:
from 2,50 up to 4,20mm – Height of the wave: from 35 upt to 80mm
Typologies of zig-zag springs availables:
– zig-zag springs in rolls of 25mts., or 30mts. (different lenght can be agreed according to customer’s special
requirement)
– zig-zag springs in cut lenghts: flat, curved or highly curved (circles).
Endings typologies available:
– terminal with bend;
– terminal with eyelet;
– terminal with coupling for direct insertion to frame.
Superficial Treatments:
– raw;
– zinc-plated;
– powder-coated.
Need less than 10 springs?
The most popular type of springing used in modern upholstery.
Is your chair or settee seat sagging?
You may well have a broken spring which you can easily replace!
To see if you have a broken spring firstly feel through the platform under the cushions to see if you can feel a gap
where a spring should be.
Secondly turn your chair upside down and take a few staples out of the dust cover on the bottom of the furniture.
You will be able to see if any springs are broken.
If you have a broken spring carefully remove both ends from the retaining clip, measure the original length and
order the correct length new spring from us!
Zig Zag Springs (also known as No-sag or Serpentine springs are used a lot in modern furniture .
A minimum of 5 springs should be used under each seating area i.e. chair = 5 springs, 2 seater sofa =10 springs.
However the more zig zag springs used the firmer the seat.
When the zig zag springs are fitted across the seat they should be almost flat with just a slight dome upwards and
all the zig zag springs should then be tied into place with Laid / Lashing Cord, three rows across a normal size seat.
This makes the zig zag springs act as a unit instead of individually, which can cause them to break easier.
The zig zag springs are then covered with hessian and a padding, we recommend Typar Backed Felt as it is very
strong and easy to use. The seat can then be covered with calico and/ or your top cover. The zig zag springs are
stocked in standard sizes but can be easily cut with a hacksaw if you need to adjust the size.
Products Description
Factory Price Zig Zag Spring Inner Serpentine Sofa Zigzag Spring For Furniture Snake Spring
Zigzag springs are also known as “No-sag spring”, ”Sinuous spring”, “Arcless spring”, “Serpentine spring”,
“S-shaped spring”, “Snake spring”, “S spring”, are mainly make of high carbon steel wire. They are widely
used in sofa (seat and back), chairs (seat and back), automobile car. Zigzag springs can be made flat, curve,
round or other shapes up to customers’ requirements.