Tire changer made in China

C-860A

Function features:

*Semi-automatic tire changer with tilt arm

*pneuma-lock

*The mounting head is made of specail steel which is wearable, unpliable and unbreakable.

*The hexangular shaft is made of S41 hex steel, which can avoid the distortion when operate the stiff tire.

*Double-bending technic  made the vertical column with high intensity.

*The clamp on the turntable has 3 steps to adjust inside to ensure clamping 10"-26" tire.

*The clamp is made of specail material, be able to bear long time.

*The quick deflate valves are installed in front of / at the rear of the bead breaker cylinder to fasten the speed of the movement of the piston. The one-side of movement can be compeleted in about 2-3 seconds.

*The horizontal arm use 50mm squre shaft which can ensure the intensity and endurance.

*The bead breaker blade adopts the arc design and can rotate in four direction so that it can release the bead brake power better when do the work.

*The width of the bead breaker arm working can adjust two step to make sure brake max 15" tire.

*The pedal assembly adopts the drawer structure in order to remove and maintain expediently.

*The diameter of the clamp control cylinder is 80mm to make sure the clamp power stronger.

*Provide exhaust inflation function to help the tire stick against the rim closely very fast.

*Standard configuration Italy air regulator.