DS-1(PLC) butt welder

1.1 machine plant (0.3-2.5mm)

1.1.1 DS-1 (PLC) combined-type resistance welding machine

1.1.2 manual clamping devices: eccentric clamp tray material for the eccentric stress and pressure spring 9-CR-SI materials, pressure springs made of 60 Silicon manganese materials, vacuum quenching, reaching more than 65 degrees of hardness, abrasion resistance, durability, long life characteristics. Material brass clamping base is 62, JAWS made of beryllium and nickel alloys, using NC linear cutting machine tools to make clamping Groove;

1.1.3-wheel mobile devices: round 2, brake wheel 2, made of imported polyurethane;

1.1.4, color touch screen PLC frequency converter control system unit;

1.1.5 clearance adjustment device: control distance by scale-reading;

1.1.6 annealing: eccentric clamping, clamping base is 62 brass material;

1.1.7 Magnifier work light;

1.1.8 grinding machine: with safety shield, shock absorbers, 0-99 seconds time delay control;

1.1.9 disc manually cutting tool: blades made of high speed steel;

1.1.10 welded sled: the axis and the line bearings tie slide, low coefficient of friction, shaft bearings with spur line for the TNT brand.

Technical parameters

1.2.1 the power 220V/380V

1.2.2 welding powe r 0.4KVA

1.2.3 weld diameter 0.3~2.5mm

1.2.4 welded carbon content 0.7~0.84% high carbon steel

1.2.5 pressure stepless regulation series

1.2.7 level 0.8-2.5V

1.2.8 the normal frequency 50HZ

1.2.10 annealing electrodes adjustment range 22-152mm

1.2.11 welding rate by more than 95%

1.2.12 welding dissected breaking strength greater than the original breaking strength of steel wire 90% above

1.2.13 dimensions 520x520x1000mm

1.2.14 product weight 75kg