Active Member
|
Address: Room 404,Chuangxin Building,Hualong Road, Jinan,Shandong,China
Phone: 86-531-80960819
Contact name:Ms. Grace Zhang
Jinan Mgreenbelt Machinery Co,.Ltd |
|
|
Industrial Plastic Auxiliary Equipment Air Cooled Water Chiller For Injection Machine
Description of air to water cooling system
Tchnical Specification
| Model | Unit | MG-10C(D) |
| Nominal cooling capacity | kcal/h 50HZ/60HZ | 24510 29412 |
| KW 50HZ/60HZ | 28.5 34.2 | |
| Set temp. range | 3ºC~50ºC | |
| Input power | KW | 1083 |
| Power supply | 3PH-380V-50HZ (200V/220V/415V-50HZ/60HZ) | |
| Refrigerant | Type | R22/R134a/407c |
| Type of control | Thermostatic expansion valve | |
| Compressor | Type | Hermetic scroll |
| Power(kw) | 4.54*2 | |
| Condenser | Type | Finned copper tube+low noise outer rotor fan |
| Cooling air flow(m3/h) | 10000 | |
| Evaporator | type | Tank with coil/shell and tube |
| Chilled fluid flow(m3/h) | 4.89 | |
| Volume(L) | 200 | |
| Inlet and outlet pipe diameter(inch) | 2" | |
| Pump | Power(kw) | 0.75 |
| Lift(m) | 20 | |
| Dimension | Length(mm) | 1560 |
| Wide(mm) | 850 | |
| High(mm) | 1500 | |
| Weight | kg | 450 |
| Safety protection | Compressor over temperature,over current,high and low pressure,Phase sequence,phase-missing | |
1) The specification above is for R22 refrigerant, please contact us if you need R407c,R134a ,etc.
2) The standard power is 3ph-380v-50hz, optional 220V, 380V-415V,440V,460V,480V,600V,50Hz/60Hz, 3Phase
Main parts of air cooled water chiller
Our industrial using air cooled water chiller adopt famous brand components to ensure the high quality and good performance for your usage. Popular PLC control system which show out working condition of each parts, and touch screen operate,to be controlled easily and powerful. Main four parts below:
| Compressor brand | Copeland,Sanyo, Danfoss | Temperature Controller | PUNP, PLC | |
| Electrical components | Schneider | Expansion valve | EMERSON | |
| Water pump | CNP/MINAMOTO | Dry filter | DANFOSS | |
| Evaporator | MGreenbelt | Condenser | MGreenbelt | |
Service for plastic chiller
Before order:Our team will supply you the water chiller solution, include working, installation, shipping and etc, all will based on your working condition, clients just inform us what you want.
After order:Engineer team Tel:0086-531-80960819, and also can email us, any support need we will response within 24 hours.
If any quality problem the news parts will be sent within 3 days, shiping charge by us.
Payment term:50% Down payment, the balance before shipment, or you also can show us if any special required.
Package of water chiller for plastic
Package of water chiller: Standard export wooden case
Shipping by LCL, if your quantity is large we will arrange FCL.
If any further questions or inquiry please contact with us:
Ms Grace Zhang
Ph:+8618615626360
Skype:mb.gracezhang
Email:mg.chillers at gmail.com
![[MG] Small Water Chiller for Plastic Blow Machine](http://img2.everychina.com/img/35/6c/67d90c677c80333fec866882dd73-80x80c1-e98b/mg_small_water_chiller_for_plastic_blow_machine.jpg "Industrial Plastic Auxiliary Equipment 10HP Air Cooled Water Chiller For Injection Machine")