Active Member
|
Address: No.399,Hexing yangjin road,Jinfeng town,Zhangjiagang city, Jiangsu Province, China
Phone: 86-189-15687100
Contact name:Mr. mateo
Zhangjiagang City Acemien Machinery Co., Ltd. |
|
It includes a twin-screw extruder, a mould, a calibration unit, a haul-off unit, a cutter, a tilter and so on.
Characteristics of PVC corrugated title: bright color, easy cutting, portability, fire-resistance, erosion resistance.
Application: workshop, warehouse, carport, terminal market, road boarding, veranda, heat insulation canopy etc.
The drawing of corrugated roof sheet making machine
3. Technical specification
1,Screw loader | Technical data |
| Rated transmission capacity: 500kg/h Motor power: 1.1KW Pusher motor: 0.55kw Pipe dia: φ102mm Pipe material:304SS |
880mm PVC+ ASA Co-extrusion Glazed tile extrusion line
2,SJZ80/156 conical twin-screw extruder | Technical data |
Extrusion capacity | 280-350kg/h |
Screw | Diameter conical 80/ 156 mm Material of screw: 38CrMoAlA Surface treatment: Alloy and Nitriding processing, thickness: 0.4 ~ 0,7mm, Polishing Rotating speed (counter rotating): 1-36.9RPM |
Barrel | Diameter conical 80/156 Inner processing: Alloy and Nitrided with thickness: 0.4 ~ 0.7mm Heating zones: 5 Heating mode: Cast Aluminum heater covered with stainless steel Heating power: 24kw Cooling mode: Blower 0.55×4sets |
Driving motor | Motor power: 55Kw AC (SIEMENS) |
Dosing feeding system | Motor:1.5Kw Double screw forced feeding |
Vacuum system
| Vacuum pump: 2.2kw,1 set Vacuum degree = 0 ~ 0.075 Mpa |
Adaptor
| Material: #40steel Chrome plated40, inner convergent flow type Connection method with die: clamping block + bolt Pressure melt sensor and thermocouple |
Main electric cabinet
| Inverter: ABB Contactor: Schneider Air Switch: LS Relay: Omron Temperature controller: Omron |
Self-protective system
| Over current protective of motor Over pressure protective of screw |
Outer size and weight | 5200×1550×1550mm 5000kg |
| |
3,Vacuum loader and drying hopper | Technical data |
Vacuum loader
| Rated transmission capacity: 200kg/h Motor power: 1.1KW Pipe diameter: Φ50 Hopper : stainless steel Max air volume: 2 M3/min |
Drying hopper | Load capacity: 50kg Power of air-blower: 0.12KW Heating power: 4.8KW |
| |
4.SJ50/30 single screw extruder | Technical data |
Extrusion capacity | 50kg/h |
Screw | 38CrMoAl ,Nitriding, thickness: 0.4 ~ 0,7mm, Polishing Rotating speed (counter rotating): 1-48RPM Dia:50mm L/D:30:1 |
Barrel | 38CrMoAl ,Nitriding, thickness: 0.4 ~ 0,7mm, Grinding. Heating zones: 4 Heating mode: Cast Aluminum heater covered with stainless steel Heating power: 8kw Cooling mode: Blower 0.18×4sets |
Driving motor | Motor power: 15Kw AC (SIEMENS) |
Main electric cabinet
| Inverter: ABB Contactor: Schneider Air Switch: LS Temperature controller: Omron |
Outer size and weight | 2800×1350×1400mm 1500kg |
| |
5,Extrusion mould and distributor | Technical data |
| Flat extrusion mould: Mould type: clothes rack Material of die-head: 5CrNiMo steel Effective width of mould lip: 1100mm Adjusting arrange of mould thickness: 1-4mm Final width of product: 880mm Final thickness of product: 2-3mm Heating power of each zone: 5KW×7sets Heater: stainless steel stick Polishing precision of mould lip flow plane: 0.015－0.02(um), others: 0.02－0.03(um)Electroplate: mould flow plane treatment by hard chrome plating, thickness 0.03－0.04mm, hardness: 60－65RocKWellc, surface treatment by chrome plating at thickness: 0.01－0.02mm Flow distributor: Material: P20steel Composite structure: AB type Heating power: 5KW |
6,Embossing roller | Technical data |
| Central height: 1050mm Max line speed: 5m/min Rotating power: 1.5KW×2 Dimension of roller:φ300mm×1250mm Up roller is Embossing roller, the down roller is mirror Roller. Roller surface treatment by hard chrome plated (depth 0.10-0.15) Control System |
7,Temperature controller | Technical data |
| Max water temperature:90 ℃ Heating power 15KW Water pump power 1.5KW
Used for embossing roller |
8,Glazed-tile forming machine | Technical data |
| Quality of module: 44 sets Material: aluminum alloy Extrusion Line speed: 0-3m/min Max haul-off power: 50KN Driver motor power: 5.5KW Adopt ABB frequency inverter control Coolingmode:fancooling,0.55KWx8sets External connecting gas source exhaust amount 0.67m3/min Exhaust pressure0.7MPa Moving of Forward and Backward Range±:750mm Motor power:0.18KW |
9,Cutter | Technical data |
| Cutting mode: saw cutting Cutting motor power: 1.5KW Pneumatic control,
|
10,Stacker | Technical data | |
| Material: stainless steel Length: 6000mm | |
11,Ridge tile Oven | Technical data | |
| Two layer structure Put the flat tile to the Oven, when the temperature reach to 150℃,put the flat tile to the Ridge tile forming machine, The final product see List 12 | |
1. Low cost:
The entire machine, we make it ourselves to reduce the cost of our
customer.
2. Genuine product with excellent quality:
We choose our material very strict,
all the material come to our factory must pass the quality test
substandard goods are returned to the supplier.
3. Engineers available to serve oversea:
4. Quick delivery:
The company provides just in time delivery with its streamlined
supply chain
5.cost saving
We take strong attention to every detail in the manufacturing
process,
the quality control in our factory is very strict,
all defective semi-manufactures must be treated again or reject.
all of machine must be checked out, then delivered to our customer.
all above that pushing up the price,
what we want to do is give our customer a good quality product with
stable working and long lived.
