Active Member
|
Address: #301,Hong Du building,45 district ,Bao'an ,shenzhen,Guangdong,China
Phone: 86-755-66608016
Contact name:Mr. Steven Young
HongKong Bonad Technology Limited |
|
|
Quality Insurance! IEC60529 Handheld IPX3 IPX4 Spray Nozzle
Introduction:
The Spray Tester IPX 3/4 is a hand-held test device to verify protection against spraying and splashing water. The water pressure can be adjusted using the flow control knob on the device to give the required flow rate. The pressure can be seen on the gauge which is convenient positioned by the Spray Tester IPX 3/4.The spray pattern of the nozzle is made to the specifications of IE60529. The removable shield feature make it easy to test without the interference of the shield .
Applications:
Spray Tester IPX 3/4 is designed to perform tests in large and small scale products. It is a great option when a portable tester is necessary. The Spray Tester IPX 3/4 is an alternative to the Oscillating Tube for establishing the degree of protection against ingress water.
The Spray Tester IPX 3/4is intended for use on specimens that will not fit within the diameter of the Tube Tester. The primary IEC tests include IPX3 and IPX4 protection against water spraying and splashing water.
No. | Item | parameter |
1 | Water supply | Water flow rate is 50~150kpa clean water without inclusion. |
2 | Spray nozzle parameters | external diameter: 102mM spherical diameter: S 75.5mm There is a middle hole and There are 24 holes in the internal circle of holes of which the included angle is 30°. There are 96 holes in the external circle of holes of which the included angle is 15°. |
3 | Water flow | 10L/min±5%,Flow meter is adjustable |
4 | Range of pressure gauge | 0~0.4Mpa |
5 | Baffle | removable |
6 | Pressure gauge | 0~0.25MPa |
7 | Site requirements | Dedicated IP waterproof test room,The ground should be flat with illumination With good function of inflow and drainage. Wall installation |
Number of Holes | 121 |
Diameter of Nozzle Holes | 0.5mm |
Material | Spray nozzle make of brass |
Reference | IEC60529, IEC60598-1, IEC 60335-1, IEC60745-1 |
